Matthias Apitz wrote:
El día Wednesday, September 03, 2008 a las 08:04:49AM -0700, Sam Leffler
escribió:
Matthias Apitz wrote:
Hello,
I'm using WPA to connect to my various Wifi AP's (office, home, partner
locations) and have them well configured in the wpa_supplicant.conf(5)
file;
>from time to time at home I encounter that it is associating with an
unknown AP of my neighbourhood:
# ifconfig iwi0
iwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:13:ce:a1:e6:81
inet 192.168.2.3 netmask 0xffffff00 broadcast 192.168.2.255
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: associated
ssid o2DSL_kJaR channel 1 (2412 Mhz 11g) bssid 00:19:cb:86:b3:84
authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit bmiss 10
scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11g 7
roam:rate11g 5 protmode CTS roaming MANUAL
# ifconfig iwi0 list scan
SSID BSSID CHAN RATE S:N INT CAPS
o2DSL_kJaR 00:19:cb:86:b3:84 1 54M 19:0 100 EP
xxxxxxxxxxxx 00:14:6c:44:aa:f6 11 54M 13:0 100 EP WPA
the network with SSID 'o2DSL_kJaR' is not im my
/etc/wpa_supplicant.conf;
how this is possible and how can I prevent this?
You must have a wildcard entry in your wpa_supplicant.conf file (i.e.
one w/o an ssid specified).
Thx for the idea, but I don't have any wildcard entry; I've checked the
conf file and also wpa_cli says:
list_networks
network id / ssid / bssid / flags
0 santaclara any
1 tarara any [CURRENT]
2 OCLCPICAUK any
3 board_room any
4 guagua any
5 OCN-LAN any
6 ConnectionPoint any
and:
# fgrep network= /etc/wpa_supplicant.conf | wc -l
7
# fgrep ssid=\" /etc/wpa_supplicant.conf
ssid="santaclara"
ssid="tarara"
ssid="OCLCPICAUK"
ssid="board_room"
ssid="guagua"
ssid="OCN-LAN"
ssid="ConnectionPoint"
So far as I know this should not happen. It'd be useful to have a
wpa_supplicant log that shows it associating to an ssid not listed in
the config file.
Sam
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"