El día Wednesday, August 06, 2008 a las 07:29:31PM +0200, Oliver Fromme escribió:
> Matthias Apitz wrote: > > I've updated usb/80361, see > > http://www.freebsd.org/cgi/query-pr.cgi?pr=80361 > > because I have the same problem as well that an USB key attaches fine > > when plugged in at boot time, but not later: > > I'm just wondering what happens if you enforce a rescan > on the (virtual) SCSI bus. That is, after you have > plugged in the USB stick and the problem occured, type > "camcontrol rescan 0". > this did not helped; I tried it a lot of times; also reading with dd(1) from /dev/da0 did not helped; > If that doesn't help, please try this patch: ... The problem is that this was a USB stick of a friend of me in which I have created a booting FreeBSD so he can make the installation of it in an eeePC; will try to get back this USB stick from him for further tests... matthias -- Matthias Apitz Manager Technical Support - OCLC GmbH Gruenwalder Weg 28g - 82041 Oberhaching - Germany t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http://www.UnixArea.de/ b http://gurucubano.blogspot.com/ We should all learn from the peoples of The Netherlands, France and Ireland. Aprendamos todos de los pueblos de Holanda, Francia e Irlanda. _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
