On Thu, Jan 24, 2008 at 10:27:31AM +0100, Chris Stromblad wrote: > Hi, > > This is the output from lspci -v:
'lspci -nvv' is preferred as I have to check device ids. > 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 > PCI-E Fast Ethernet Controller (rev 12) > Subsystem: Dell Unknown device 022e > Flags: bus master, fast devsel, latency 0, IRQ 16 > Memory at f9ffc000 (64-bit, non-prefetchable) [size=16K] > I/O ports at de00 [size=256] > Capabilities: <access denied> > > 0b:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG > Network Connection (rev 02) > Subsystem: Intel Corporation Unknown device 1021 > Flags: bus master, fast devsel, latency 0, IRQ 17 > Memory at f9eff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > > I included the wireless data as well because I wanted to ask if you know > whether or not this has support from ports? It doesn't get detected when > booting FreeBSD so I assume that either it needs a binary blob, or that > perhaps there are some drivers in ports that can be installed once I > have the wired network functioning properly. > Didn't wpi(4) detect your wireless network hardware? > Once again thank you very much for your help, and if there is anything > else I can do or get you, please let me know! > > - Chris > -- Regards, Pyun YongHyeon _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
