On Wed, Oct 24, 2007 at 10:50:21AM -0700, Sean Bruno wrote: > I have a drive that contains two seperate bootable partitions(ad0s1a and > ad0s2a). The boot device selection menu(boot0?) appears to only be able to > support 9600 8N1. I wanted to run the serial console at 115200, but I > currently have to switch to 9600 if I need to change the boot device. Is > there a way around this that I can't see? Could I get around this with a > BIOS that can do console redirection?
Which "boot device selection menu" are you referring to? "boot0?" implies you don't know. Here's the difference: boot0 is this stage: F1 FreeBSD F5 Drive 1 Default: F1 boot2 is this stage: >> FreeBSD/i386 BOOT Default: 0:ad(0,a)/boot/loader boot: If you want serial capability in boot0, you should set BOOT_COMCONSOLE_SPEED=115200 in your make.conf. After you do that, you'll need to rebuild the boot blocks. The procedure for doing that is step 4 of Section 24.6.5.2 in the Handbook: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/serialconsole-setup.html You'll also need to update the MBR boot code on-disk to use the new serial version (called boot0sio). boot0cfg -b /boot/boot0sio should do the trick. If you want serial capability in boot2, it's much easier. All you have to do is make a file called /boot.config and place -S115200 in it. You may also want to consider using -S115200 -Dh. See the boot(8) manpage for details on what -S, -D, and -h do. Make sure you don't have a CONSPEED setting in your kernel config as well. All that said, chances are the boot blocks you're using are likely configured to use data from ad0s1a (for booting). So that would be the place to put the /boot.config file. -- | Jeremy Chadwick jdc at parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB | _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
