Hello,
I have:
ldd /usr/local/sbin/clamd
/usr/local/sbin/clamd:
libclamav.so.2 => /usr/local/lib/libclamav.so.2 (0x80063e000)
libiconv.so.3 => /usr/local/lib/libiconv.so.3 (0x8007a8000)
libz.so.3 => /lib/libz.so.3 (0x800999000)
libbz2.so.2 => /usr/lib/libbz2.so.2 (0x800aad000)
libgmp.so.7 => /usr/local/lib/libgmp.so.7 (0x800bbc000)
libthr.so.2 => /usr/lib/libthr.so.2 (0x800cf6000)
libc.so.6 => /lib/libc.so.6 (0x800e0d000)
clamd -V
ClamAV 0.90.1/2873/Mon Mar 19 18:46:10 2007
uname -a
FreeBSD mx 6.2-STABLE FreeBSD 6.2-STABLE #1: Tue Jan 30 11:22:54 CET
2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MX amd64
And this in top:
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
2879 vscan 258 96 0 272M 240M umtx 2 222:07 87.55%
clamav-milter
A ktrace for the process shows:
kdump -EH | less
2879 100579 clamav-milter 0.000000 RET _umtx_op 0
2879 100469 clamav-milter 0.000009 CALL
_umtx_op(0x801226ac0,0,0x18875,0,0)
2879 100579 clamav-milter 0.000041 CALL
_umtx_op(0x801226ac0,0x1,0x188e3,0,0)
2879 100579 clamav-milter 0.000078 RET _umtx_op 0
2879 100469 clamav-milter 0.000082 RET _umtx_op 0
2879 100579 clamav-milter 0.000084 CALL
_umtx_op(0x801226ac0,0,0x188e3,0,0)
2879 100469 clamav-milter 0.000091 CALL
_umtx_op(0x801226ac0,0x1,0x18875,0,0)
2879 100469 clamav-milter 0.000122 RET _umtx_op 0
2879 100579 clamav-milter 0.000127 RET _umtx_op 0
2879 100579 clamav-milter 0.000141 CALL
_umtx_op(0x801226ac0,0x1,0x188e3,0,0)
2879 100469 clamav-milter 0.000131 CALL
_umtx_op(0x801226ac0,0,0x18875,0,0)
2879 100744 clamav-milter 0.000161 RET _umtx_op 0
2879 100744 clamav-milter 0.000177 CALL
_umtx_op(0x801226ac0,0x1,0x18988,0,0)
2879 100579 clamav-milter 0.000155 RET _umtx_op 0
2879 100469 clamav-milter 0.000198 RET _umtx_op 0
2879 100469 clamav-milter 0.000213 CALL
_umtx_op(0x801226ac0,0x1,0x18875,0,0)
2879 100579 clamav-milter 0.000202 CALL
_umtx_op(0x801226ac0,0,0x188e3,0,0)
2879 100782 clamav-milter 0.000233 RET _umtx_op 0
2879 100744 clamav-milter 0.000191 RET _umtx_op 0
2879 100782 clamav-milter 0.000251 CALL
_umtx_op(0x801226ac0,0x1,0x189ae,0,0)
2879 100744 clamav-milter 0.000266 CALL
_umtx_op(0x801226ac0,0,0x18988,0,0)
2879 100782 clamav-milter 0.000283 RET _umtx_op 0
2879 100782 clamav-milter 0.000308 CALL
_umtx_op(0x801226ac0,0,0x189ae,0,0)
[13210 similar lines skipped]
2879 100553 clamav-milter 0.125179 CALL read(0x38f,0xb83d000,0x1000)
2879 100579 clamav-milter 0.125180 CALL
_umtx_op(0x801226ac0,0x1,0x188e3,0,0)
2879 100553 clamav-milter 0.125198 GIO fd 911 read 4096 bytes
Although clamav does some work occasionally, it really just spins in the
above loops and postfix (which delivers mail to it via milter) just gets
connection timeouts.
I've seen Martin's e-mails in some places about this issue and there he
wrote that this problem occurs only with libpthread. It seems it's not.
The previous version of the port worked fine^Wbetter.
It seems that the problem has a straight relationship with the number of
processors, because those machines which has less of them (2 cores)
timeout and get stuck far less (or don't timeout at all) than the
others, which has 4 (two dual core xeon CPUs).
The problem was even worse with a dual quad core system, where the
previous port (both with libthr and libpthreads) was useless with
clamav, because of the above problem.
Do you have any idea about the solution?
ps: I run clamav in foreground mode, most of the machines have non-HTT
processors (Xeon 51XX for the most problematic ones, which has two
cores, but no HTT)
Thanks,
--
Attila Nagy e-mail: [EMAIL PROTECTED]
Free Software Network (FSN.HU) phone: +3630 306 6758
http://www.fsn.hu/
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
