At about the time of 2/13/2007 10:24 PM, M. Warner Losh stated the following: > In message: <[EMAIL PROTECTED]> > Daniel Rudy <[EMAIL PROTECTED]> writes: > : At about the time of 2/12/2007 10:49 PM, M. Warner Losh stated the > : following: > : > : sio0: configured irq 19 not in bitmap of probed irqs 0 > : > : sio0: port may not be enabled > : > > : > This may be your problem. sio isn't detecting the interrupts > : > happening on this card, it seems, from this dmesg. You may need to > : > use John Baldwin's hacks to force sio to not use fast interrupts. > : > This makes it possible to share it with non-fast interrupt sources. > : > Please let me know if you need these patches. > : > : I'm working on changing the hardware around and moving the modem to a > : different PCI slot to see if that makes a difference. The system is > : reinstalling right now on the machine (I tried to install Linux but it > : failed...miserably). > > OK. Please let me know if you need any additional help. Are the sis > cards add-in cards, or on the motherboard? > > Warner >
sis0 is on the mainboard, sis1 and sis2 are addon cards. Netgear FA-311/312 series. -- Daniel Rudy _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
