Hi list
I have an Intel Motherboard with a SRCS16 raid controller. According to
amr(4), this controller should be supported. Unfortunately the 5.4 Install
CD does not recognize the raid controller. Loading amr before booting does
not help (results in the error message seen in the dmesg below). When
booting normally, the amr module is not loaded.
Now I have the following questions:
Is this version of the Intel Controller not supported? If this is the case,
is there a simple solution to get it recognized? (a quick glance at the amr
code was not enough to enlighten me)
Is there an easy way to setup gmirror with the install CD in case the
controller does not work? (even when loaded the geom_mirror module, the
gmirror tool does not know about the 'label' command)
thanks
Stefan
dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
module_register: module amr/amrd already exists!
Module amr/amrd failed to register: 17
module_register: module pci/amr already exists!
Module pci/amr failed to register: 17
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 1073610752 (1023 MB)
avail memory = 1036853248 (988 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>
port 0xc880-0xc8bf mem 0xfce00000-0xfce3ffff,0xfcec0000-0xfcedffff irq 24
at device 3.0 on pci2
em0: Ethernet address: 00:04:23:b7:6c:4c
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>
port 0xcc00-0xcc3f mem 0xfce80000-0xfcebffff,0xfcee0000-0xfcefffff irq 27
at device 3.1 on pci2
em1: Ethernet address: 00:04:23:b7:6c:4d
em1: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
em2: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>
port 0xd880-0xd8bf mem 0xfcfa0000-0xfcfbffff irq 54 at device 4.0 on pci3
em2: Ethernet address: 00:0e:0c:4e:2f:d0
em2: Speed:N/A Duplex:N/A
em3: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>
port 0xdc00-0xdc3f mem 0xfcfe0000-0xfcffffff irq 55 at device 4.1 on pci3
em3: Ethernet address: 00:0e:0c:4e:2f:d1
em3: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver
attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port
0xb800-0xb81f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port
0xb880-0xb89f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbc00-0xbc1f irq 18
at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci4: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xac00-0xac0f,0xb000-0xb003,0xb080-0xb087,0xb400-0xb403,0xb480-0xb487 irq
18 at device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5
irq 6 drq 2 on acpi0
orm0: <ISA Option ROMs> at iomem
0xd1000-0xd1fff,0xd0000-0xd0fff,0xcf000-0xcffff,0xce000-0xcefff,0xca800-0xcdfff,0xc0000-0xca7ff
on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2992518045 Hz quality 800
Timecounters tick every 10.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09dde24
acd0: CDRW <Slimtype COMBO SOSC-2483K/KK0A> at ata0-master PIO4
ad4: 239372MB <Maxtor 7L250S0/BANC1E00> [486344/16/63] at ata2-master
SATA150
ad6: 239372MB <Maxtor 7L250S0/BANC1E00> [486344/16/63] at ata3-master
SATA150
Mounting root from ufs:/dev/md0
em2: Link is up 100 Mbps Full Duplex
Output of pciconf -l -v:
[EMAIL PROTECTED]:0:0: class=0x060000 card=0x10798086 chip=0x35908086
rev=0x0a hdr=0x00
class = bridge
subclass = HOST-PCI
[EMAIL PROTECTED]:0:1: class=0xff0000 card=0x10798086 chip=0x35918086 rev=0x0a
hdr=0x00
[EMAIL PROTECTED]:1:0: class=0x088000 card=0x10798086 chip=0x35948086 rev=0x0a
hdr=0x00
class = base peripheral
[EMAIL PROTECTED]:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x0a
hdr=0x01
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:29:0: class=0x0c0300 card=0x10798086 chip=0x24d28086
rev=0x02 hdr=0x00
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:1: class=0x0c0300 card=0x10798086 chip=0x24d48086
rev=0x02 hdr=0x00
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:2: class=0x0c0300 card=0x10798086 chip=0x24d78086
rev=0x02 hdr=0x00
class = serial bus
subclass = USB
[EMAIL PROTECTED]:29:7: class=0x0c0320 card=0x10798086 chip=0x24dd8086
rev=0x02 hdr=0x00
class = serial bus
subclass = USB
[EMAIL PROTECTED]:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0xc2 hdr=0x01
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:31:0: class=0x060100 card=0x00000000 chip=0x24d08086
rev=0x02 hdr=0x00
class = bridge
subclass = PCI-ISA
[EMAIL PROTECTED]:31:1: class=0x01018a card=0x10798086 chip=0x24db8086
rev=0x02 hdr=0x00
class = mass storage
subclass = ATA
[EMAIL PROTECTED]:31:2: class=0x01048f card=0x34388086 chip=0x24df8086
rev=0x02 hdr=0x00
class = mass storage
subclass = RAID
[EMAIL PROTECTED]:31:3: class=0x0c0500 card=0x10798086 chip=0x24d38086
rev=0x02 hdr=0x00
class = serial bus
subclass = SMBus
[EMAIL PROTECTED]:0:0: class=0x060400 card=0x00000044 chip=0x03298086 rev=0x09
hdr=0x01
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:0:1: class=0x080020 card=0x10798086 chip=0x03268086 rev=0x09
hdr=0x00
class = base peripheral
subclass = interrupt controller
[EMAIL PROTECTED]:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 rev=0x09
hdr=0x01
class = bridge
subclass = PCI-PCI
[EMAIL PROTECTED]:0:3: class=0x080020 card=0x10798086 chip=0x03278086 rev=0x09
hdr=0x00
class = base peripheral
subclass = interrupt controller
[EMAIL PROTECTED]:3:0: class=0x020000 card=0x11798086 chip=0x10798086 rev=0x03
hdr=0x00
class = network
subclass = ethernet
[EMAIL PROTECTED]:3:1: class=0x020000 card=0x11798086 chip=0x10798086 rev=0x03
hdr=0x00
class = network
subclass = ethernet
[EMAIL PROTECTED]:4:0: class=0x020000 card=0x10798086 chip=0x10798086 rev=0x03
hdr=0x00
class = network
subclass = ethernet
[EMAIL PROTECTED]:4:1: class=0x020000 card=0x10798086 chip=0x10798086 rev=0x03
hdr=0x00
class = network
subclass = ethernet
[EMAIL PROTECTED]:12:0: class=0x030000 card=0x10798086 chip=0x47521002
rev=0x27 hdr=0x00
class = display
subclass = VGA
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
