Anton, thank you for taking time to help. I have answered your questions within your text at the bottom of this email as best as I know how to as a raw BSD Unix user.
I defentaley appologise for not answering for such a long time, my attention was caught in the anti-spam war (and I receive thousands of those things).
Is it you that mailed me privately on if_atuwi.ko, or was it somebody else? I am sorry, I think it was somebody else (no results after a big search on my inbox).
-----Original Message-----
From: Anton Alin-Adrian [mailto:[EMAIL PROTECTED] Sent: Saturday, April 03, 2004 4:18 PM
To: Craig Booth
Cc: [EMAIL PROTECTED]
Subject: Re: Wireless Card Issue AFTER Install
Craig Booth wrote:
Any guru out there that has the knowledge to provide some advice to
persist the use of the Linksys card beyond the first install? I tried this question on the Questions mailing list, but no one could tackle it, unfortunately.
Situation:
I have set up my Sony VAIO PCG-FRV27 laptop as a dual boot machine between
Win XP Pro and FreeBSD. I am using a Linksys Wireless card connecting through a Linksys router. My install successfully enabled and used the wireless card and router to
install directly from the FreeBSD ftp site (after CD boot) and completed
with no errors. Even though my rc.conf file is verified as setup with "DHCP" and the pccard
enabled, and even though the startup processes appear to find and enable the
card ok, I can't connect back to the ftp site to download more stuff unless
I use the CD to restart the install over the ftp site again. It either
can't resolve the ftp site, or hangs during the attempt.
I have read where this can sometimes happen with dual boot machines when the
other OS doesn't properly release the card, but I have tried unplugging the
machine, removing and putting back both the card and the laptop battery
before rebooting, and it still doesn't work. I am getting the [Null] [Null]
message after the Linksys Card Found message during startup, as my earlier
reading about the problem discussed, but nothing seems to change that,
unless I reinstall FreeBSD from the CD (which I'm obviously not going to do
everytime I want to use FreeBSD!) Two things I notice when I go to set up the media in SYSINSTALL. The
gateway address (192.168.2.1) and the DHCP assigned address (range starting
with 192.168.2.2), both present on this same screen when booting from the
CD, are missing from the DHCP config screen that comes up just before
SYSINSTALL attempts to connect to the ftp site, though the connection
attempt still fails if I enter the info back in manually before trying to
connect. Also, a message comes up before that which says something about
being in multiuser mode, and ask if I want to assume network settings are
already correct. (or something like that) This multiuser message is not
present when booting from the CD.>
_______________________________________________
[EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Hi, could you please provide a bit more info?
What is the model of your Linksys card?
Answer: Linksys Instant Wireless Network PC Card WPC11 V3.0
and what driver are you using for it?
Answer: Win XP: Intersil islp2 version 2.0.10.0 FreeBSD: Intersil Firmware: Primary 1.01.00, Station 1.04.02 (as reported by FreeBSD)
Is it supported on the FreeBSD hardware list?
Answer: Yes
How do you configure your wireless driver? Using what software/scripts? Don't skip details please.
Answer: No software scripts, none that I initiated anyway. The wireless card is configured through the wi0 (Lucent WaveLAN/IEEE 802.11 wireless adapter) choice, since that was the only wireless adapter selection available on the SYSINSTALL menu. Again, it worked for the initial install, and when I try other choices, the logon scripts change it back to wi0 anyway, since that's apparently being picked up on auto-detection. Here are excerpts from the logon messages that may answer your questions, as well as provide a bit more insight:
Apr 3 18:06:11 pccardd[49]:Card "The Linksys Group, Inc."(" Instant Wireless Network PC Card")[ISL37300P][RevA] matched "The Linksys Group, Inc."(" Instant Wireless Network PC Card")[(null)][(null)] . . . login: wi0 at port 0x240-0x27f irq11 slot 0 on pccard0 wi0: 802.11 address:00:06:25:15:f9:34 wi0: using RF:PRISM3(PCMCIA) wi0: Intensil Firmware: Primary 1.01.00, Station 1.04.02
Apr 3 18:06:16 pccardd[49]:wi0: The Linksys Group, Inc."(" Instant Wireless Network PC Card inserted.
Apr 3 18:06:25 pccard[49]: pccardd started
Trying a non-DHCP config for testing might help. See if you can ping. Can
you ping your own IP of the wireless card, locally?
Answer: I pinged 192.168.2.100 successfully. However, I'm not sure how to find out the local address of the card, as 192.168.2.100 was what DHCP assigned, I believe.
Can you ping the broadcast IP for it?
Answer: If this is what I think you mean, it's the http://68.168.1.42 IP? No, it can't ping that IP. Furthermore, it can't ping anything on the outside, including DSN name http://www.FreeBSD.org or anything else. I also tried pinging an IP directly (http://216.136.204.117 is the FreeBSD site IP) and that failed as well. The message during ping failure is:
Ping:sendto:No route to host
Is there any firewalling capability in your kernel/loaded modules?
Answer: I have only loaded the FreeBSD standard i386 kernel and any modules that come standard. I have not loaded any extra software at this point until I get a good baseline.
I assume the card is working neat on XP.
Answer: Yes, flawlessly.
Have you tried it after rebooting freebsd without actually going into XP?
Answer: Yes, I have tried that and it acted no differently (still failed.)
XP may set up some BIOS parameters which FreeBSD doesn't like?
Answer: As I mentioned in the first email, I tried booting fresh right to FreeBSD without first going to Win XP, and did so after removing and putting back the laptop's power cord and battery.
...Thanks again for you help, and I'm looking forward to some more follow-up on this, as I'm stumped.
Kindest regards,
Craig ---------------------------------------------------------
Regards,
I see it uses PRISM 3 chip. I don't know if that is compatible with the FreeBSD version of firmware. However:
If you edit /etc/rc.conf , you can eliminate the DHCP configuration. Set your interface to use a static class C IP, for example 10.0.0.1/255.255.255.0. You can find that in the Handbook, at the network config section.
Example: ifconfig_wi0="inet 10.0.0.1 netmask 255.255.255.0"
Of course your card is detected as wi0, as it is your only wireless card in the laptop.
Remove (comment out with '#') any DHCP information from /etc/rc.conf related to wi0 and the IP of wi0.
Reboot.
Now ok, ping your IP. (ie. 10.0.0.1).
# ifconfig wi0 should show wi0 is properly configured
If you can ping your own IP, the driver is most probably working fine, and you need to set up the Wireless Networking Parameters. You can do that using this tool:
# wicontrol
Mainly you have to set up the operation mode (ad-hoc, access-point, etc), the WEPKey (if any and if WEP is enabled, should be) and the name of the SSID.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html
The Wireless Networking section in the handbook explains all that in great detail..
You should see in your logs (probably in /var/log/messages), if your network card is able to join the network or not.
I am looking forward to hear feedback after you try this.
I appologise again for the huge delay, I kinda missed your mail.
Regards,
-- Alin-Adrian Anton Reversed Hell Networks GPG keyID 0x1E2FFF2E (2963 0C11 1AF1 96F6 0030 6EE9 D323 639D 1E2F FF2E) gpg --keyserver pgp.mit.edu --recv-keys 1E2FFF2E _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
