Hey everybody, I am trying to set up a FBSD 5.2.1-RELEASE machine to be able to dial a number via tip as described here:
http://docs.freebsd.org/doc/5.1-RELEASE/usr/share/doc/faq/serial.html (That page is a bit out of date, at least in that it says it applies to FBSD 2, 3, and 4.) My HW setup is an old pentium box with a USB to Serial cable attaching to a USR external 56k Modem. I added this to my /etc/remote tip115200|Dial any phone number at 115200 bps:\ :dv=/dev/ucom0:br#115200:at=hayes:pa=none:du: tip57600|Dial any phone number at 57600 bps:\ :dv=/dev/ucom0:br#57600:at=hayes:pa=none:du: cu115200|Use cu to dial any number at 115200bps:\ :dv=/dev/ucom0:br#57600:at=hayes:pa=none:du: tip9600|Dial any phone number at 9600 bps:\ :dv=/dev/ucom0:br#9600:at=hayes:pa=none:du: But the suggested command gives me core: tip -115200 23645 Segmentation fault (core dumped) Same result with -57600, -9600 and with cu syntax I have an entry for the usb serial device: usb1:dv=/dev/ucom0:br#9600:pa=none: And if I say tip usb1 I can issue dialer commands and it works. The ultimate goal here is having somebody be able to run a shell-script named "dial-funkybox" and have it dial and connect them. Sorry if I left out something important. Any thoughts? Thanks, Mike _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
