Thanks for that there is basic support but this doesn't seem to detect
a RAID 5 array :( The 5.1 Highpoint driver results in a da device which
works correctly but I would really like to get back on to 5.2 as it fixes
a number of issues I've encountered with 5.1.
Regards
Steve
----- Original Message -----
From: "Robert Eckardt" <[EMAIL PROTECTED]>
> Hi Steve,
>
> there should be basic support in the ATA-driver. (For the 372 there is.)
>
> However, it does not support initial synchronization of two disks and
> the handling in case of an error is very limited.
> You either have to start using an already existing array or resync using
> some BIOS tool. Later, the driver does not care whether the content of
> the RAID is identical or not.
>
> Robert
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or
entity to whom it is addressed. In the event of misdirection, the recipient is
prohibited from using, copying, printing or otherwise disseminating it or any
information contained in it.
In the event of misdirection, illegible or incomplete transmission please telephone
(023) 8024 3137
or return the E.mail to [EMAIL PROTECTED]
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
