For the pci_* calls, you need to add the interface stuff. In Makefile
SRC = bus_if.h device_if.h pci_if.h device.c In device.c uncomment the #include <pci/*> lines ---chuck On Tue, Mar 02, 2004 at 10:54:03AM -0500, [EMAIL PROTECTED] wrote: > I did that. I've got some #difine collisions with PCI and some system > defines not finding files like: > > @/sys/bus.h:320: device_if.h: No such file or directory > @/sys/bus.h:321: bus_if.h: No such file or directory > In file included from wd1100-lkm.c:28: > @/pci/pcivar.h:176: pci_if.h: No such file or directory > In file included from wd1100-lkm.c:28: > > or problems with functions not found like: > > @/pci/pcivar.h: In function `pci_enable_io': > @/pci/pcivar.h:274: warning: implicit declaration of function > `PCI_ENABLE_IO' > @/pci/pcivar.h: In function `pci_disable_io': > @/pci/pcivar.h:280: warning: implicit declaration of function > `PCI_DISABLE_IO' > @/pci/pcivar.h: In function `pci_set_powerstate': > @/pci/pcivar.h:307: warning: implicit declaration of function > `PCI_SET_POWERSTATE' > > code is here: http://chiakotay.nexlab.it/acaro/wd1100/wd1100.c > > > > > Chuck Tuffli writes: > > Try creating a Makefile similar to the other loadable modules. For > > example, > > > > MAINTAINER = [EMAIL PROTECTED] > > KMOD = mydriver > > > > .PATH: ${.CURDIR}/../../dev/wd > > > > SRCS = driver.c > > > > .include <bsd.kmod.mk> > > > > Then just type make. See src/sys/modules/*/Makefile for other > > examples. > > -- Chuck Tuffli <chuck_tuffli AT NO_SPAM agilent DOT com> Agilent Technologies, Storage Area Networking _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
