In article <[EMAIL PROTECTED]>, Bill Paul <[EMAIL PROTECTED]> writes > >So. I picked up a Linksys USB200M USB 2.0 ethernet adapter that uses >the ASIX Electronics AX88172 chip, and I started cobbling together a >driver. This chip uses a series of vendor specific commands to do >things like read/write the MII management interface on the MAC, >read/write the SROM, set the RX filter, multicast hash table, etc. >I can do all this no problem. The Linksys NIC uses a RealTek 8201L >PHY, and I can attach it and negotiate a link.
I have a Netgear FA120, also following ASIX's 'demonstration design', (i.e. reference design), of AX88172 and Realtek 8201L phy. I've not tried it with FreeBSD yet, but I had in mind to use NetBSD's uax driver for the AX88172 as the starting point! uax man page: http://netbsd.gw.com/cgi-bin/man-cgi/man?uax+4+NetBSD-current Netbsd cvs web: http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/dev/usb/if_uax.c Hope this helps! Tony _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
