Marcin Dalecki wrote: > >>Here is my first cut at support for the Synaptics touchpads, > >2. The pad has 4 buttons; left and right work as before. In between, > >there are a small up and down button. Now the up button acts as the > >middle button (button 3?) -- ie I can paste with it. The down button > >still does nothing.
> Well for certain the down button does something in esp. it is posting > button 4 events. Watch out xev please - you should see it there. Actually, I don't. If I run moused without button options, ie moused -t auto -d /dev/psm0 I see the up button but not the down button. If I run either moused -t auto -d /dev/psm0 -3 or moused -t auto -d /dev/psm0 -m 4=2 -m 5=4 I see neither the up button nor the down button in xev. > >What I'd like is to emulate 3 buttons with simultaneous left-right > >clicking, as before; have the "up" button behave like scrolling a > >mousewheel up; and have the "down" button behave like scrolling a > >mousewheel down. I thought the > > Option "ZAxisMapping" "4 5" > Option Buttons 5? Yes, that was there. > >in XF86Config, and > > moused -m 4=3 -m 5=4 > >would do it. But no luck (though the above moused options do stop the > >up button from acting like a middle button). > > moused -m 4=2 -m 5=4 should do it. No luck, see above. Perhaps my hardware isn't a Synaptics touchpad? (although it gets detected as one with your patch). It's a Compaq Presario 1200 around a year old. Thanks - Rahul To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-hackers" in the body of the message
