(sorry for the cross posting)
after some more - and long - testing this is what i have:
if the card is 'virgin' - no pxe, flash memory 'empty', all seems ok, dhclient
works ok.
if i enable PXE, running it as diskless is fine (i don't need dhclient).
but if i boot of the disk and use dhclient, then it does not work - arp
requests are sent and replies come back, but never make it.
if i just ifconfig em0 ip.addr then all is ok.
using an older if_em ver 1.1.10, dhclient works fine.
btw, after the card has been pxe enabled, disabling the flash memory does
not help, i can't get it back to work as it did in 'virgin' mode.
one more thing, one 'virgin' card is causing panic with bad ram.
hope this helps,
danny
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
