What form are you using for the drive in the BIOS--LBA or Large? Trying
forcing it to Large (sometime "LG") write down the geometry determined
by the BIOS, and enter it with fdisk using during the install. This
should work. :)
jmc
On Mon, 2002-07-01 at 18:25, Lucky Green wrote:
> Fifty bucks to the person that is first to help me solve this problem.
>
> I have a brand new Asus A7V333 motherboard with the latest BIOS version
> 1007. I am trying to install FreeBSD 4.6 via floppies onto a brand new
> Western Digital WD1200AB 120GB IDE drive. I have installed FreeBSD many
> times before going back to FreeBSD 2.x.
>
> The partition editor and disklabel only see 8056MB of my 120GB drive. In
> other words, I am being stopped by the 8.4GB barrier. Obviously, Asus'
> new motherboard supports IDE drives larger than 8.4GB. Following some
> suggestions, I wrote a slice and disklabels to the drive at 8.4GB. This
> did not help. The drive is still only being recognized at 8.4GB.
>
> Any suggestions how to overcome the problem are appreciated. I need to
> very badly copy some data from a FireWire drive with FAT32 partitions
> onto the new FreeBSD installation before 6 AM PDT.
>
> Thanks in advance,
> --Lucky
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-hackers" in the body of the message
>
--
_
| |V| / ' || MacroHard -- \
\_| | | \_, || the perfection of form over |
----------------------------------|| substance, marketing over |
Web: http://www.borgsdemons.com || performance, and greed over |
AIM: johnmcooper || design . . . |
=====================================================================/
Public Key: http://www.borgsdemons.com/Personal/pgpkey.asc |
=====================================================================\
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
