> > umass0: Fujitsu Memorybird, rev 1.00/1.00, addr 2
> > da0 at umass-sim0 bus 0 target 0 lun 0
> > da0: <Fujitsu Memorybird 1.05> Removable Direct Access SCSI-0 device
> > da0: 650KB/s transfers
> > da0: 15MB (32000 512 byte sectors: 64H 32S/T 15C)> try to mount:
> >
> > try to mount:
> > snorry# mount -t msdos /dev/da0s1 /disk2
> > (da0:umass-sim0:0:0:0): READ(06). CDB: 8 0 0 0 1 0
> > (da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:20,0
> > (da0:umass-sim0:0:0:0): Invalid command operation code
> > da0: reading primary partition table: error reading fsbn 0
> > msdos: /dev/da0s1: Input/output error
> > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): READ(06). CDB: 8
> > 0 0 0 1 0
> > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): ILLEGAL REQUEST
> > asc:20,0
> > Mar 23 04:24:54 snorry /kernel: (da0:umass-sim0:0:0:0): Invalid command
> > operation code
> > Mar 23 04:24:54 snorry /kernel: da0: reading primary partition table:
> > error reading fsbn 0
> > snorry#
>
> i have found something very similar at:
> http://www.FreeBSD.org/cgi/query-pr.cgi?pr=34205
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-questions" in the body of the message
I fixed the problem. I added following lines to
/usr/src/sys/cam/scsi/scsi_da.c (FreeBSD-4.5RELEASE):
/* Below a list of quirks for USB devices supported by umass. */
/*
+ * Fujitsu Siemens Memorybird
+ */
+ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Fujitsu", "Memorybird", "*"},
+ /*quirks*/ DA_Q_NO_6_BYTE|DA_Q_NO_SYNC_CACHE
+ },
Maybe this is written in an unusual manner, but I'm an absolute newbie to
freebsd and C. Sorry
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
