Respectiful Gentlemans, I have next problem : I have Siemens Gigaset 3070 ISDN External USB modem. My box is running FreeBSD 4.2 on Intel Pentium III. When I boot the OS, it detects it on /dev/ugen0 ... When I put ugen0 in /etc/ppp/ppp.conf and run it, my OS reboots with kernel trap error. One my friend told me that it must not be on ugen0 since it means general, and it means that OS didn't detect it. It doesn't matter if it shows vendor info. (For example I run usbd, than I plug in and out my modem, and kernel reports that Siemens Gigaset 3070 has been unpluged or pluged on /dev/ugen0 ... Please, can you help me ? I don't know, maybe I need some kernel patch or somthin' like that. Thanks p.s. I also have problem to set up Epson EPL-5800L Laserjet printer. It detects priter, tip printer says connected but then it freeze term. I would be also thankful if you could help me about it, or ISDN Thank You very much. Sinecerly Milos Marceta _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-hackers" in the body of the message
