I have been having problems with the the newer Windows machines, 2000 &
Me, not being able to access some websites. I have had to manually edit
the registry to change the MTU. This should not be needed, because I am
running 4.3-RELEASE which has had the tcpmssfixup feature for a while.
It is enabled. Unfortunately this maching is in an office in Canada,
and I am not in Canada. I am using natd and ipfw for NAT and the
firewall. The link has a static IP if it matters. Below I am attaching
ppp.conf. I have watched some of the data with tcpdump on both tun0 and
ed0, but I am not sure what to look for.
Suggestion on how to proceed.
Jim
---- ppp.conf ----
default:
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device /dev/cuaa1
set log Phase Chat LCP IPCP CCP tun command
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
set timeout 180 # 3 minute idle timer (the
default)
add default HISADDR # Add a (sticky) default route
enable dns # request DNS info (for
resolv.conf)
magma:
ident
set device PPPoE:ed0
set MRU 1492
set MTU 1492
set authname **************
set authkey *******
set log Phase Chat Connect
set dial
set login
set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0/0 0.0.0.0/0
set timeout 0
set server +3000 *******
enable tcpmssfixup
disable dns
set cd 5
set crtscts off
enable pap
disable pred1
------------------
--
/"\ ASCII Ribbon Campaign .
\ / - NO HTML/RTF in e-mail .
X - NO Word docs in e-mail .
/ \ -----------------------------------------------------------------
[EMAIL PROTECTED] http://www.FreeBSD.org The Power to Serve
[EMAIL PROTECTED] http://www.TheHousleys.net
---------------------------------------------------------------------
The wise man built his network upon Un*x.
The foolish man built his network upon Windows.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
