> I have a bunch of old floppy disks with some text files I'd like to
> recover. Many of them have errors and are unreadable past a certain point
> in the disk. Others I can't read from at all.
>
> The ones I can't read, period, are all 1.44MB-size floppies. I've tried
> dd'ing from /dev/fd0c, /dev/fd0.1440, etc., but exits with "Input/Output
> Error" before copying anything.
i think you can try dd from the raw device (/dev/rfd) using the "iseek"
or "skip" option to jump over the missing sectors.
Alternatively, you can use "conv=noerror,sync" to keep reading
after errors (the bad blocks are NUL-filled)
cheers
luigi
> The kernel prints:
>
> fd0c: hard error reading fsbn 0 of 0-31 (ST0 40<abnrml> ST1 1<no_am> ST2 0
> cyl 0 hd 0 sec 1)
>
>
> I've been more successful reading 720K floppies from /dev/fd0.720, but
> many of them have errors that stop dd in its tracks, yielding another
> Input/Output error.
>
> The kernel prints:
>
> fd0c: hard error reading fsbn 1503 of 1488-1503 (ST0 44<abnrml,top_head>
> ST1 20<bad_crc> ST2 20<bad_crc> cyl 41 hd 1 sec 10)
>
>
> Since the files on the disks are just text, all I want to do is to be able
> to extract as many of the bits on the disk as possible, even if some of
> the bits are wrong, and then run strings over it and sort out the
> content. I've looked at the floppy driver source and it seems to be
> incredibly low-level, i.e. it turns the drive motor on and off, even. Can
> someone familiar with the driver give me some pointers as to what I'd have
> to modify to let it 1) read those 1.44MB disks, and 2) tolerate data
> errors?
>
> Thanks,
>
> Brian
>
> --
> Brian Buchanan [EMAIL PROTECTED]
> --------------------------------------------------------------------------
> FreeBSD - The Power to Serve! http://www.freebsd.org
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-hackers" in the body of the message
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
