Hello,
I've got a machine connected to a 100 MBit/FDX network and I would like to store
largish (~20 MB or bigger) files on it that are downloaded from the network over a dc
card. The only consideration here is speed since the files are all temporary. I'm
running FreeBSD 4.3-RC1.
The dc card is fine and does 9.2 MB/s. The problem arises when writing to the UFS
filesystem, which makes the transfer rate drop down to 5.6 MB/s using the standard 8
kb blocksize. The problem here seems
to be the combined network and disk interrupt load since writing to the filesystem
from /dev/zero results in 13 MB/s rates. The issue is that -- and I'm not feeding
trolls here -- that Linux 2.2 smashed up to 8.5 MB/s through...
Reading from the filesystem and uploading to the network puts 8.6 MB/s through, so
that's no problem.
I tried to increase block-sizes on said filesystem to 64 kb, which increased the
throughput to around 7 MB/s. When trying to make blocksizes 128 of 256 kb, newfs
segfaults (...).
So my questions:
a.) Is it possible to create larger blocksizes, and would that increase write speed?
b.) Are there other newfs options that I can use to increase throughput?
c.) Does FreeBSD support filesystem other than UFS/FFS that allow for faster transfer
rates?
PS: The tests were already done with the fs mounted async. The drive in question
communicates at UDMA/33 on a PIIX4 controller in an AMD K6/2 233 system.
Niek Bergboer
--
Conscience doth make cowards of us all.
-- Shakespeare
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
