At 09:47 01-01-02 -0700, you wrote:
>Félix-Antoine Paradis wrote:
> >
> > Hi,
> > When we do a "dmesg" on a 4.2-STABLE box, we get:
> >
> > arp: 200.42.126.18 moved from 00:e0:7d:7b:53:f0 to 00:c0:df:f4:ac:05 on ed0
>
>This means exactly what is says: IP address 200.42.126.18 was originally
>associated with ethernet MAC address ...:53:f0, but has moved to ...:ac:05.
> >
> > and, in ifconfig, it says:
> >
> > ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> > inet 200.42.126.20 netmask 0xffffff00 broadcast 200.42.126.255
> > inet6 fe80::2e0:7dff:fe7b:548a%ed0 prefixlen 64 scopeid 0x1
> > ether 00:e0:7d:7b:54:8a
> >
> > ed0 is connected to a switch. we want to know what the "arp: " message
> > means. on the linux box, we have:
> >
> > eth0 Link encap:Ethernet HWaddr 00:C0:DF:F4:AC:05
> > inet
> addr:200.42.126.18 Bcast:200.42.126.23 Mask:255.255.255.248
>
>Yes, this interface is now showing what ARP reported above.
>
> > eth1 Link encap:Ethernet HWaddr 00:E0:7D:7B:53:F0
> > inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
>
>And this one is not.
>
> > Both eth0 and eth1 are connected to that same switch.
>
>Did the Linux box reboot when you got the ARP message? If so, the Linux
>box has reversed the order of the ethernet interfaces. If not, the Linux
>box is routing packets over the wrong interface, which can happen when you
>have two networks mingled together like this. What kind of switch is this?
It is a Catalyst 2900 XL Series
>--
> "Where am I, and what am I doing in this handbasket?"
>
>Wes
>Peters Softweyr LLC
>[EMAIL PROTECTED]
>http://softweyr.com/
>
>
>To Unsubscribe: send mail to [EMAIL PROTECTED]
>with "unsubscribe freebsd-hackers" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
