On 5/9/2012 10:46 AM, Daniel Braniss wrote:
> Hi,
> after a long time, I finaly got around trying to get the GSM/UMTS working,
> but so far it thinks it's a mass storage!
>
> ugen0.2: <USB MMC Storage Sierra Wireless> at usbus0, cfg=0 md=HOST spd=FULL
> (12Mbps) pwr=ON
>
> bLength = 0x0012
> bDescriptorType = 0x0001
> bcdUSB = 0x0110
> bDeviceClass = 0x0000
> bDeviceSubClass = 0x0000
> bDeviceProtocol = 0x0000
> bMaxPacketSize0 = 0x0040
> idVendor = 0x1199
> idProduct = 0x0fff
> bcdDevice = 0x0000
> iManufacturer = 0x0001 <Sierra Wireless>
> iProduct = 0x0002 <USB MMC Storage>
> iSerialNumber = 0x0003 <SWOC22905731>
> bNumConfigurations = 0x0001
>
> I added
> U3G_DEV(SIERRA, TRUINSTALL, 0),
>
> to sys/dev/usb/serial/u3g.c but that did not help
Normally its U3GINIT_SIERRA in the driver I have in stable. If you do a
camcontrol eject pass0
does it put the device into modem mode ? If you add
hw.usb.u3g.debug=1
to /boot/loader.conf
what does the dmesg look like. I have used a number of sierra devices
in the past with the Alix boxes and they do work. Not sure about your
particular unit.
---Mike
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
_______________________________________________
freebsd-hackers@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
