On 08.02.2011 02:15, Trever wrote: > Does anyone know why boot0sio would wait about 1 minute before proceeding? > > If this is a known issue I can't find anything about it. I know there is a > bug with boot0cfg not changing the partition to boot to. Don't know if this > is related. > > FreeBSD 8.2RC2 i386. Boot blocks were compiled with speed 115200. Installed > via nanobsd to a compact flash card on an Habey 6620II Z530, but there > doesn't seem to be anything wrong other than with boot0sio, or something with > how nanobsd installs boot0sio (NOT boot0- that works). But I have checked > what nanobsd is doing, that seems ruled out, seems fine. BIOS seems ruled > out. Seems like boot0sio. > > Everything works in all manner of configurations, just this very annoying > long "hang" before boot0sio runs. Again, boot0 does not do this. > > I'm not talking about the pause after it displays the boot partition > selection options. It's before anything happens. I get a blinking > underscore in the upper left hand corner of my screen (and nothing on the > serial port) for a very long minute before the system boots. Doesn't matter > if I have serial attached or not, etc..
I've seen this too. I do not known a reason. And since I do not use physical serial console I just replace boot0sio with boot0 while building NanoBSD and skip the problem :-) Eugene Grosbein _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "freebsd-hackers-unsubscr...@freebsd.org"
