> I want to see if any PCI bus has a high PCI clock and the actual
> setting of the PCI clock for the bt848.
is it supposed to change with the OS release given the same hardware ?
I have had this very same problem with a P5-90, PPro-200, Pentium2-300,
in all cases switching back to 2.2.6 cured the problem.
Roger was having the same exact problem on all of his machines i
think.
> The output of the debug printfs will give us a clue as
> to what is upsetting the bt848 also it is the way that
> I have managed to debug many of the problems with
> the folks over at the freebsd mailing list so this
> request is not new from me.
right, but i always saw the request, and never (i think) saw a feedback
so i was curious...
> Cheers,
> Amancio
> P.S.: the verbose boot message may help isolate the problem
> to a given hardware or PCI chipset ; additionally, please
> include whether you are using PAL or NTSC.
PAL. not sure that it makes a difference, anyways; vic uses a very low
res (CIF).
cheers
luigi
-----------------------------------+-------------------------------------
Luigi RIZZO, [email protected] . Dip. di Ing. dell'Informazione
http://www.iet.unipi.it/~luigi/ . Universita` di Pisa
TEL/FAX: +39-050-568.533/522 . via Diotisalvi 2, 56126 PISA (Italy)
http://www.iet.unipi.it/~luigi/ngc99/
==== First International Workshop on Networked Group Communication ====
-----------------------------------+-------------------------------------
To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-hackers" in the body of the message
