On Tue, 11 Jul 2000, Kenneth D. Merry wrote:
> > Is Adaptec aic-7892 and 7899 160/m SCSI support in the pipeline to be
> > worked on? aka, has adaptec released any info to those FreeBSD team
> > members who work on the SCSI drivers? Is it possible that maybe within the
> > next 4 months 160/m support will exist in FreeBSD 4/5?
>
> It's working, but isn't in the tree yet.
AFAIK, the aic-7892 works just fine in 4.0-STABLE, and it has worked
fine for a few months now. I'm not sure if the actual 160/m works though.
This is from my dmesg:
ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xfc00-0xfcff mem
0xfffbf000-0xfffbffff irq 7 at device 13.0 on pci0
ahc0: aic7892 Wide Channel A, SCSI Id=15, 16/255 SCBs
.....
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39140W 1498> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
Could some kind committer add a line to RELNOTES.TXT that the
19160 adapter is supported (or at least works partially) ?
===========================================================================
Get off the keyboard you furry feline !
Marc Veldman, CFBSDN (Certified FreeBSD Newbie)
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
