Greetings All and Everyone.
I am becoming quite desperate and I am in of dire nned for help with PPPoE!
I spoke to an individual on the list a few weeks ago regarding this issue
and I truly appreciate their time (Thanks Dima).
Here's the deal... I can't get PPPoE running to save my life!!
I have tried everything including setting everything through PPP manually
to no avail.
I have included along with this e-mail the output of ifconfig -a
before launching ppp (this is why the tunneling device is not shown),
the output of dmesg, a copy of /var/log/ppp.log as well as a copy of
/etc/ppp.conf.
And yes, I recompiled the Kernel with all of the Netgraph options about
a month ago.
I can run tcpdump on my ethernet device ed1 and it is sending out a
PADI packet but it is not getting anything back.
If anybody is out there with any ideas at all please let me know!!
many thanks,
Adam Michalak
Jun 15 15:41:21 ppp[208]: Phase: Using interface: tun0
Jun 15 15:41:21 ppp[208]: Phase: deflink: Created in closed state
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0
255.255.255.0 0.0.0.0
Jun 15 15:41:21 ppp[208]: tun0: Command: default: add default HISADDR
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute failure:
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute: Cmd = Add
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute: Dst = 0.0.0.0
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute: Gateway = 10.0.0.2
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute: Mask = 0.0.0.0
Jun 15 15:41:21 ppp[208]: tun0: Command: default: nat enable yes
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set device PPPoE:ed1
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set mru 1492
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set mtu 1492
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set speed sync
Jun 15 15:41:21 ppp[208]: tun0: Command: default: enable lqr
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set lqrperiod 5
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set cd 5
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set dial
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set login
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set timeout 0
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set authname xxxxxxxx
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set authkey ********
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set log Phase tun Chat LCP IPCP
command TCP/IP
Jun 15 15:41:21 ppp[208]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0
255.255.255.0 0.0.0.0
Jun 15 15:41:21 ppp[208]: tun0: Command: default: add default HISADDR
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute failure:
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute: Cmd = Add
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute: Dst = 0.0.0.0
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute: Gateway = 10.0.0.2
Jun 15 15:41:21 ppp[208]: tun0: TCP/IP: bundle_SetRoute: Mask = 0.0.0.0
Jun 15 15:41:21 ppp[208]: tun0: Command: default: nat enable yes
Jun 15 15:41:21 ppp[209]: tun0: Phase: PPP Started (ddial mode).
Jun 15 15:41:21 ppp[209]: tun0: Phase: bundle: Establish
Jun 15 15:41:21 ppp[209]: tun0: Phase: deflink: closed -> opening
Jun 15 15:41:21 ppp[209]: tun0: Phase: deflink: Connected!
Jun 15 15:41:21 ppp[209]: tun0: Phase: deflink: opening -> dial
Jun 15 15:41:21 ppp[209]: tun0: Phase: deflink: dial -> carrier
Jun 15 15:41:26 ppp[209]: tun0: Phase: deflink: Disconnected!
Jun 15 15:41:26 ppp[209]: tun0: Phase: deflink: carrier -> hangup
Jun 15 15:41:26 ppp[209]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0
octets out
Jun 15 15:41:26 ppp[209]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Thu
Jun 15 15:41:26 2000
Jun 15 15:41:26 ppp[209]: tun0: Phase: deflink: hangup -> opening
Jun 15 15:41:26 ppp[209]: tun0: Phase: deflink: Enter pause (30) for redialing.
Jun 15 15:41:56 ppp[209]: tun0: Phase: deflink: Redial timer expired.
Jun 15 15:41:56 ppp[209]: tun0: Phase: deflink: Connected!
Jun 15 15:41:56 ppp[209]: tun0: Phase: deflink: opening -> dial
Jun 15 15:41:56 ppp[209]: tun0: Phase: deflink: dial -> carrier
Jun 15 15:42:02 ppp[209]: tun0: Phase: deflink: Disconnected!
Jun 15 15:42:02 ppp[209]: tun0: Phase: deflink: carrier -> hangup
Jun 15 15:42:02 ppp[209]: tun0: Phase: deflink: Connect time: 6 secs: 0 octets in, 0
octets out
Jun 15 15:42:02 ppp[209]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Thu
Jun 15 15:42:02 2000
Jun 15 15:42:02 ppp[209]: tun0: Phase: deflink: hangup -> opening
Jun 15 15:42:02 ppp[209]: tun0: Phase: deflink: Enter pause (30) for redialing.
Jun 15 15:42:32 ppp[209]: tun0: Phase: deflink: Redial timer expired.
Jun 15 15:42:32 ppp[209]: tun0: Phase: deflink: Connected!
Jun 15 15:42:32 ppp[209]: tun0: Phase: deflink: opening -> dial
Jun 15 15:42:32 ppp[209]: tun0: Phase: deflink: dial -> carrier
Jun 15 15:42:37 ppp[209]: tun0: Phase: deflink: Disconnected!
Jun 15 15:42:37 ppp[209]: tun0: Phase: deflink: carrier -> hangup
Jun 15 15:42:37 ppp[209]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0
octets out
Jun 15 15:42:37 ppp[209]: tun0: Phase: total 0 bytes/sec, peak 0 bytes/sec on Thu
Jun 15 15:42:37 2000
Jun 15 15:42:37 ppp[209]: tun0: Phase: deflink: hangup -> opening
Jun 15 15:42:37 ppp[209]: tun0: Phase: deflink: Enter pause (30) for redialing.
Jun 15 15:42:51 ppp[209]: tun0: Phase: Signal 15, terminate.
Jun 15 15:42:51 ppp[209]: tun0: Phase: deflink: Disconnected!
Jun 15 15:42:51 ppp[209]: tun0: Phase: deflink: opening -> closed
Jun 15 15:42:51 ppp[209]: tun0: Phase: bundle: Dead
Jun 15 15:42:51 ppp[209]: tun0: Phase: PPP Terminated (normal).
Jun 15 15:42:51 ppp[209]: tun0: TCP/IP: bundle_SetRoute failure:
Jun 15 15:42:51 ppp[209]: tun0: TCP/IP: bundle_SetRoute: Cmd = Delete!
Jun 15 15:42:51 ppp[209]: tun0: TCP/IP: bundle_SetRoute: Dst = 0.0.0.0
Jun 15 15:42:51 ppp[209]: tun0: TCP/IP: bundle_SetRoute: Gateway = 0.0.0.0
Jun 15 15:42:51 ppp[209]: tun0: TCP/IP: bundle_SetRoute: Mask = 0.0.0.0
#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by [EMAIL PROTECTED]
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.2 1999/08/27 23:24:08 peter Exp $
# Modified on 05/26/2000 for PPPoE
#################################################################
default: # or name_of_service_provider
set device PPPoE:ed1 # replace x11 with your ethernet device
set mru 1492
set mtu 1492
set speed sync
enable lqr
set lqrperiod 5
set cd 5
set dial
set login
set timeout 0
set authname xxxxxxxx # YOURLOGINNAME
set authkey yyyyyyy # YOURPASSWORD
set log Phase tun Chat LCP IPCP command TCP/IP # you can add more detailed loggin if
you wish
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
nat enable yes # if you want to enable nat for your local net
papchap:
set authname xxxxxxxx # YOURLOGINNAME
set authkey yyyyyyy # YOURPASSWORD
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::240:5ff:feaa:f705%ed1 prefixlen 64 scopeid 0x2
ether 00:40:05:aa:f7:05
ed2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
ether 00:40:05:aa:f7:14
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
inet6 fe80::240:5ff:feaa:f705%gif0 prefixlen 64 scopeid 0x6
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
inet6 fe80::240:5ff:feaa:f705%gif1 prefixlen 64 scopeid 0x7
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
inet6 fe80::240:5ff:feaa:f705%gif2 prefixlen 64 scopeid 0x8
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
inet6 fe80::240:5ff:feaa:f705%gif3 prefixlen 64 scopeid 0x9
stf0: flags=8000<MULTICAST> mtu 1280
inet6 fe80::240:5ff:feaa:f705%stf0 prefixlen 64 scopeid 0xa
faith0: flags=8000<MULTICAST> mtu 1500
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Sun May 28 14:54:45 PDT 2000
blake@:/usr/src/sys/compile/SK_rev2
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (198.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 268435456 (262144K bytes)
avail memory = 256737280 (250720K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc038e000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0x3000-0x300f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 13.0 irq 17
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6000-0x60ff mem 0xe0804000-0xe0804fff
irq 16 at device 14.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ed1: <NETGEAR EA201 Ethernet Card> at port 0x240-0x25f irq 5 on isa0
ed1: supplying EUI64: 00:40:05:ff:fe:aa:f7:05
ed1: address 00:40:05:aa:f7:05, type NE2000 (16 bit)
ed2: <NETGEAR EA201 Ethernet Card> at port 0x260-0x27f irq 9 on isa0
ed2: address 00:40:05:aa:f7:14, type NE2000 (16 bit)
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 14669MB <WDC WD153BA> [29805/16/63] at ata0-master using WDMA2
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <TOSHIBA CD-ROM XM-5701TA 0787> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ed1: starting DAD for fe80:0002::0240:05ff:feaa:f705
ed1: DAD complete for fe80:0002::0240:05ff:feaa:f705 - no duplicates found
