On Tue, 14 Mar 2000 [EMAIL PROTECTED] wrote:
> I have some very short term access to a Compaq 8500. The integrated raid
> array is supported under linux via it's smart array driver. I have a
> feeling that it should just work with freesd's driver, but "scanpci" shows
> it using a a vendor id of 0x1000 and a device id of 0x0010. Where in a
> 4.0 kernel do I stick these so it know's to probe it as an ida device?
>
Try /sys/dev/ida/ida_pci.c. The device ID and vendor id are stored in
the IDA_DEVICEID_SMART #define and currently the ida driver has it
hardwired to 0xAE100E11. For quick & dirty hack (i.e. if you just want to
know if the driver will work with your hardware), try changing the
IDA_DEVICEID_SMART #define to 0x10000010.
Kelly
--
Kelly Yancey - [EMAIL PROTECTED] - Richmond, VA
Analyst / E-business Development, Bell Industries http://www.bellind.com/
Maintainer, BSD Driver Database http://www.posi.net/freebsd/drivers/
Coordinator, Team FreeBSD http://www.posi.net/freebsd/Team-FreeBSD/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
