> Luigi Rizzo wrote:
>
> I have a YMF719E card (that's on the chip itself) that works on a week-old
> -current (on an Alpha no less):
by "works" i mean work in full duplex. Most reports i got for the '719
is that audio capture seems not to work. I seem to remember the problem
is in the mixer -- i.e. you get data out of the codec, but there is
no signal. Go figure where the '719 has the mute bits and mixer input
select...
Does your card really _works_ as above ?
cheers
luigi
> pcm0: <Yamaha SA2> at port
>0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 0,1 on isa0
> pcm0: interrupting at ISA irq 5
> joy0: <Generic PnP Joystick> at port 0x201 on isa0
> unknown0: <OPL3-SAX Sound Board> at port 0x100-0x107 on isa0
> unknown1: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee irq 11 on isa0
>
>
> I have another machine (toshiba tecra 8000 laptop) with a yamaha-something
> in it (this is a PNPBIOS detected device):
>
> pcm0: <Yamaha OPL-SAx> at port
>0x220-0x233,0x530-0x537,0x388-0x38f,0x330-0x333,0x538-0x539 irq 5 drq 1,0 on isa0
>
> I seem to recall it too was a YHM0021 pnp id, but I don't know exactly what it
> is.
>
> YMH0021: adding io range 0x220-0x233, size=0x14, align=0x1
> YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
> YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1
> YMH0021: adding io range 0x330-0x333, size=0x4, align=0x1
> YMH0021: adding io range 0x538-0x539, size=0x2, align=0x1
> YMH0021: adding irq mask 0x20
> YMH0021: adding dma mask 0x2
> YMH0021: adding dma mask 0x1
> YMH0021: start dependant
> pnpbios: handle 21 device ID YMH0021 (2100a865)
>
> It's not a pnp device like the one on the card in the Alpha system. It's
> statically configured by the bios setup.
>
> Cheers,
> -Peter
>
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-hackers" in the body of the message
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
