I still don't fully understand where, in the picture below, is the
"system" which you want to modify and what is instead standard stuff
that you cannot touch...
> >>From your description this is what i understand:
> >
> > customer ----[ DSL bridge ]------+----[ main router ]-- rest of net.
> > |
> > customer ----[ DSL bridge ]------+
> > |
> > repeat 150 to 900 times | shared frame relay without
> > | multicast/broadcast support
> > customer ----[ DSL bridge ]------+
>
> each DLCI is modeled as a PTP connection, so the system sees a physical
> interface for each channel. The bridge software just sees then as bridged
> interfaces.
>
> the "right" way to do it is to allocate a subnet to each bridge group, as
> different bridge groups cant talk at the mac layer by design. Im just
> trying to come up with an easy solution to free up addtional IP space so
> customers with only 2 address dont have to get a whole subnet.
cheers
luigi
-----------------------------------+-------------------------------------
Luigi RIZZO, [EMAIL PROTECTED] . Dip. di Ing. dell'Informazione
http://www.iet.unipi.it/~luigi/ . Universita` di Pisa
TEL/FAX: +39-050-568.533/522 . via Diotisalvi 2, 56126 PISA (Italy)
http://www.iet.unipi.it/~luigi/ngc99/
==== First International Workshop on Networked Group Communication ====
-----------------------------------+-------------------------------------
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
