> You don't want to know what a ethernet/parallel/serial/hub thingie looks
> like. I don't have one, so anyone that has one, could you send me the
> output of the usb_dump utility avaible from
>
> http://www.etla.net/~n_hibma/usb/usb.pl
>
>
I had a problem when I tried plugging in my two usb
ethernet/serial/parallel/hub thingies.
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=10
map[0]: type 4, range 32, base 0000ef80, size 5
uhci0: <Intel 82371AB/EB USB Host Controller> rev 0x01 int d irq 10 on
pci0.7.2
usb0: USB version 1.0, interrupting at 10
uhci0: PIRQD enable not set
usbd_match
usb0: <Intel 82371AB/EB USB Host Controller>
usbd_attach
usbd_new_device bus=0xc09eb000 depth=0 lowspeed=0
usbd_new_device: adding unit addr=1, rev=100, class=9, subclass=0,
protocol=0, maxpacket=64, ls=0
usbd_new_device: new dev (addr 1), dev=0xc0763180, parent=0xc09e6140
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
usbd_set_config_index: (addr 1) attr=0x40, selfpowered=1, power=0,
powerquirk=0
usbd_set_config_index: set config 1
usbd_set_config_index: setting new config 1
uhub0: 2 ports with 2 removable, self powered
usbd_init_port: adding hub port=1 status=0x0101 change=0x0001
usbd_init_port: adding hub port=2 status=0x0100 change=0x0000
uhub_explore: status change hub=1 port=1
usbd_new_device bus=0xc09eb000 depth=1 lowspeed=0
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
uhci_waitintr: timeout
usbd_new_device: addr=2, getting first desc failed
usbd_remove_device: 0xc09fae80
uhub_explore: usb_new_device failed, TIMEOUT
uhub0: device problem, disabling port 1
This is under 3.2-STABLE as of a few days ago. Any ideas here?
Here's the output of a windows tool I have of some of my more interesting
devices, if you're interested...
Here's the Entrega USB/Ethernet hub.
External Hub: 000000000000000d#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
Hub Power: Self Power
Number of Ports: 4
Power switching: Individual
Compound device: No
Over-current Protection: Individual
Device Descriptor:
bcdUSB: 0x0100
bDeviceClass: 0x09
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 (8)
idVendor: 0x0451 (Texas Instruments)
idProduct: 0x1446
bcdDevice: 0x0100
iManufacturer: 0x00
iProduct: 0x00
iSerialNumber: 0x00
bNumConfigurations: 0x01
ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Full
Device Address: 0x02
Open Pipes: 1
Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Interrupt
wMaxPacketSize: 0x0001 (1)
bInterval: 0xFF
This is the ethernet device, which appears as port 4 of this hub. (1-3 are
USB ports, port 4 is an ethernet port)
Device Descriptor:
bcdUSB: 0x0100
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 (8)
idVendor: 0x1645
idProduct: 0x0005
bcdDevice: 0x0202
iManufacturer: 0x02
iProduct: 0x03
iSerialNumber: 0x01
bNumConfigurations: 0x01
ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Full
Device Address: 0x06
Open Pipes: 3
Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x02
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x83
Transfer Type: Interrupt
wMaxPacketSize: 0x0008 (8)
bInterval: 0x01
Here's the hub on the Entrega USB/Serial/Parallel device:
External Hub: 0000000000000018#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
Hub Power: Self Power
Number of Ports: 4
Power switching: Individual
Compound device: No
Over-current Protection: Individual
Device Descriptor:
bcdUSB: 0x0100
bDeviceClass: 0x09
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 (8)
idVendor: 0x0451 (Texas Instruments)
idProduct: 0x1446
bcdDevice: 0x0100
iManufacturer: 0x00
iProduct: 0x00
iSerialNumber: 0x00
bNumConfigurations: 0x01
ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Full
Device Address: 0x05
Open Pipes: 1
Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Interrupt
wMaxPacketSize: 0x0001 (1)
bInterval: 0xFF
Configuration Descriptor:
wTotalLength: 0x0019
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0xE0 (Bus Powered Self Powered Remote Wakeup)
MaxPower: 0x32 (100 Ma)
Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x01
bInterfaceClass: 0x09
bInterfaceSubClass: 0x00
bInterfaceProtocol: 0x00
iInterface: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Interrupt
wMaxPacketSize: 0x0001 (1)
bInterval: 0xFF
Here's the serial port on that device:
Device Descriptor:
bcdUSB: 0x0100
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 (64)
idVendor: 0x1645
idProduct: 0x0001
bcdDevice: 0x0102
iManufacturer: 0x01
0x0409: "ENTREGA TECHNOLOGIES, INC."
iProduct: 0x02
0x0409: "Entrega USB Serial Converter"
iSerialNumber: 0x03
0x0409: "679274"
bNumConfigurations: 0x01
ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Full
Device Address: 0x07
Open Pipes: 3
Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x10
Endpoint Descriptor:
bEndpointAddress: 0x01
Transfer Type: Bulk
wMaxPacketSize: 0x0010 (16)
bInterval: 0x10
Endpoint Descriptor:
bEndpointAddress: 0x82
Transfer Type: Interrupt
wMaxPacketSize: 0x0008 (8)
bInterval: 0x08
Configuration Descriptor:
wTotalLength: 0x0027
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x60 (Self Powered Remote Wakeup)
MaxPower: 0x32 (100 Ma)
Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x03
bInterfaceClass: 0x00
bInterfaceSubClass: 0x00
bInterfaceProtocol: 0x00
iInterface: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x10
Endpoint Descriptor:
bEndpointAddress: 0x01
Transfer Type: Bulk
wMaxPacketSize: 0x0010 (16)
bInterval: 0x10
Endpoint Descriptor:
bEndpointAddress: 0x82
Transfer Type: Interrupt
wMaxPacketSize: 0x0008 (8)
bInterval: 0x08
And the parallel port:
Device Descriptor:
bcdUSB: 0x0100
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 (8)
idVendor: 0x1645
idProduct: 0x0006
bcdDevice: 0x0100
iManufacturer: 0x00
iProduct: 0x00
iSerialNumber: 0x00
bNumConfigurations: 0x01
ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Full
Device Address: 0x08
Open Pipes: 3
Endpoint Descriptor:
bEndpointAddress: 0x01
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x82
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x83
Transfer Type: Interrupt
wMaxPacketSize: 0x0004 (4)
bInterval: 0x01
Configuration Descriptor:
wTotalLength: 0x004E
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 (Bus Powered )
MaxPower: 0x31 (98 Ma)
Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x01
bInterfaceClass: 0x07
bInterfaceSubClass: 0x01
bInterfaceProtocol: 0x01
iInterface: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x01
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x01
bNumEndpoints: 0x02
bInterfaceClass: 0x07
bInterfaceSubClass: 0x01
bInterfaceProtocol: 0x02
iInterface: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x01
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x82
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x02
bNumEndpoints: 0x03
bInterfaceClass: 0xFF
bInterfaceSubClass: 0x00
bInterfaceProtocol: 0xFF
iInterface: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x01
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x82
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00
Endpoint Descriptor:
bEndpointAddress: 0x83
Transfer Type: Interrupt
wMaxPacketSize: 0x0004 (4)
bInterval: 0x01
Here's also something somewhat interesting... a USB keyboard with a PS/2
mouseport on the keyboard itself. (sorta like the mac)
Device Descriptor:
bcdUSB: 0x0100
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 (8)
idVendor: 0x1293
idProduct: 0x2101
bcdDevice: 0x0100
iManufacturer: 0x01
0x0409: "SOLID YEAR"
iProduct: 0x02
0x0409: "KEYBOARD & MOUSE"
iSerialNumber: 0x00
bNumConfigurations: 0x01
ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Low
Device Address: 0x04
Open Pipes: 2
Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Interrupt
wMaxPacketSize: 0x0008 (8)
bInterval: 0x0A
Endpoint Descriptor:
bEndpointAddress: 0x82
Transfer Type: Interrupt
wMaxPacketSize: 0x0003 (3)
bInterval: 0x0A
Configuration Descriptor:
wTotalLength: 0x003B
bNumInterfaces: 0x02
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0xA0 (Bus Powered Remote Wakeup)
MaxPower: 0x32 (100 Ma)
Interface Descriptor:
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x01
bInterfaceClass: 0x03
bInterfaceSubClass: 0x01
bInterfaceProtocol: 0x01
iInterface: 0x04
0x0409: "USB KBD"
HID Descriptor:
bcdHID: 0x0100
bCountryCode: 0x21
bNumDescriptors: 0x01
bDescriptorType: 0x22
wDescriptorLength: 0x0040
Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Interrupt
wMaxPacketSize: 0x0008 (8)
bInterval: 0x0A
Interface Descriptor:
bInterfaceNumber: 0x01
bAlternateSetting: 0x00
bNumEndpoints: 0x01
bInterfaceClass: 0x03
bInterfaceSubClass: 0x01
bInterfaceProtocol: 0x02
iInterface: 0x05
0x0409: "PS2MOUSE"
HID Descriptor:
bcdHID: 0x0100
bCountryCode: 0x21
bNumDescriptors: 0x01
bDescriptorType: 0x22
wDescriptorLength: 0x0032
Endpoint Descriptor:
bEndpointAddress: 0x82
Transfer Type: Interrupt
wMaxPacketSize: 0x0003 (3)
bInterval: 0x0A
I have no idea if this means anything to you, but in lieu of your usb dump,
it's at least something. :) If I can figure out how to make USB work on this
system with FreeBSD, i'll use usb_dump and send this to you again.
Kevin
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
