Hi Pete and All,
On Wed, 1 Sep 1999, Pete Mckenna wrote:
> We have a few dozen running mostly as uniprocesser boxes.
Ok. My server has 2 processors. I supose that you have some servers with 2
processors.
> I have also put an adaptec 2940 in them and it works as well.
What is the adaptec transfer rate? I have tested with a adaptec 80Mb, and
it didn't work too. The chipset is the same the AIC 7896.
> You need to run 3.2 or better to get the drivers for the on board
> Adaptec.
I have downloaded (with CVSup) to stable version, but I have the same
problem. I have about 10.000 users in my master.passwd. When I runnig the
vipw, my machine stay down (I can't send any e-mail, when I have the
problem).
Another test that I have done with my kernel was to put the flags below:
controller wdc0 at isa? port "IO_WD1" bio irq 14
disk wd0 at wdc0 drive 0 flags 0xb0ff
disk wd1 at wdc0 drive 1 flags 0xb0ff
controller wdc1 at isa? port "IO_WD2" bio irq 15
disk wd2 at wdc1 drive 0 flags 0xb0ff
disk wd3 at wdc1 drive 1 flags 0xb0ff
It didn't work too.
> The onboard NIC works like any other Intel 10/100 using fxp0, adding a
> asecond nic makes the onboard fxp1 (for failover purposes, I assume)
I think that I don't have problem with my NIC (Intel 10/100).
> We like them, and are trying to get Intel to make the reporting of temp
> etc and power managment Unix friendly. You can get to the bios at boot
> time (remotely via a com port) as it is which is nice.
I can't figured out what you want to say about BIOS :/
Thanks in advance.
[]s,
Luiz Morte da Costa Junior
Analista de Redes E-mail: [EMAIL PROTECTED]
Telefone: +55 19 754-2532 Fax: +55 19 255-7576
CorreioNet - Correio Popular Campinas - SP - Brazil
> Pete
>
> Kevin Lynn wrote:
> >
> > Has anyone else gotten this server board to work?
> >
> > I've got an N440BX and have been considering getting the L440GX+ but
> > haven't because I don't know if it works..
> >
> > Kevin
> >
> > On Mon, 23 Aug 1999, Luiz Morte da Costa Junior wrote:
> >
> > >
> > > Hi list,
> > >
> > > About the problem bellow, I bought a 2940 Adaptec Ultra2 Wide SCSI
> > > controller, but it didn't work too.
> > >
> > > I wrote to Justin T. Gibbs and he told me that my problem is not SCSI.
> > >
> > > Somebody has any idea?
> > >
> > > []s,
> > >
> > > Luiz Morte da Costa Junior
> > > Analista de Redes E-mail: [EMAIL PROTECTED]
> > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576
> > > CorreioNet - Correio Popular Campinas - SP - Brazil
> > >
> > >
> > > On Sun, 22 Aug 1999, Luiz Morte da Costa Junior wrote:
> > >
> > > >
> > > > Hi all,
> > > >
> > > > I have a problem with a server running a FreeBSD 3.2.
> > > >
> > > > My Server has a L440GX+ Serber Board (intel), with network card 10/100,
> > > > SCSI AIC 7896 (80MB/s), 2 SCSI disk with 9GB (80MB/s), 2 pentium III
> > > > 450Mhz (not overclocked). The NIC and SCSI are onboard.
> > > >
> > > > I recompiled a kernel to SMP, and it worked. The server is ok, but when I
> > > > run a comand with disk access (whith vipw or mysql), the performance of
> > > > server goes down. My server stays very very very slow. If I use pine to
> > > > read my messages, it doesn't work. When the comand finishes, the server
> > > > stays "ok" again.
> > > >
> > > > I recompiled the kernel with "maxusers 128", but it doesn't work.
> > > >
> > > > My SCSI cable has a terminator and the scsi setup is ok (I think :) ).
> > > >
> > > > The dmesg command output is in attchmnt.
> > > >
> > > > I appreciate any help.
> > > >
> > > > []s,
> > > >
> > > > Luiz Morte da Costa Junior
> > > > Analista de Redes E-mail: [EMAIL PROTECTED]
> > > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576
> > > > CorreioNet - Correio Popular Campinas - SP - Brazil
> > > >
> > >
> > > []s,
> > >
> > > Luiz Morte da Costa Junior
> > > Analista de Redes E-mail: [EMAIL PROTECTED]
> > > Telefone: +55 19 754-2532 Fax: +55 19 255-7576
> > > CorreioNet - Correio Popular Campinas - SP - Brazil
> > >
> > >
> > >
> > > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > > with "unsubscribe freebsd-hackers" in the body of the message
> > >
> >
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-hackers" in the body of the message
>
[]s,
Luiz Morte da Costa Junior
Analista de Redes E-mail: [EMAIL PROTECTED]
Telefone: +55 19 754-2532 Fax: +55 19 255-7576
CorreioNet - Correio Popular Campinas - SP - Brazil
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
