> I've got what I think is a working MCA shim for the 'BT' driver.
>
not quite...
The io, irq and drq values are correct on both aha & bt...
aha0 is still failing the INQUIRE command...
disk0s4a:> boot -v
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Wed Sep 1 12:13:01 EST 1999
[EMAIL PROTECTED]:/fast1/src/sys/compile/MCA
Calibrating clock(s) ... i8254 clock: 1193222 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CPU: i486 DX2 (486-class CPU)
Origin = "GenuineIntel" Id = 0x435 Stepping = 5
Features=0x3<FPU,VME>
real memory = 66060288 (64512K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0058e000 - 0x03efdfff, 60227584 bytes (14704 pages)
avail memory = 58433536 (57064K bytes)
BIOS SDT: model 0xf8, submodel 0x1b, bios_rev 0x00
BIOS SDT: features 0xf6<MCABUS,EBDA,KBDINT,RTC,IC2>
MicroChannel Architecture System detected.
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0575000.
Preloaded mfs_root "/mfsroot" at 0xc057509c.
Math emulator present
npx0: <math processor> on motherboard
npx0: 387 emulator
mca_probe...
POS REG 00 01 02 03 04 05 06 07
-----------------------------------
mca slot 1: 8f 60 d0 82 81 60 60 ff
mca slot 2: 1f 0f 01 3b ff b4 ff ff
mca slot 3: 07 70 03 bf 88 ff 08 00
mca slot 4: 42 60 09 01 ff ff ff ff
mca slot 5: 07 70 45 bf c9 ff 08 00
mca slot 6: 08 07 1d 03 f7 c5 ff ff
mca slot 7: 08 07 17 02 00 46 00 30
mca slot 8: 08 07 15 01 00 47 00 30
mca0: <MCA bus> on motherboard
mca0: unknown card (id 0x608f, disabled) at slot 1
aha0: <Adaptec AHA-1640 SCSI Adapter> io 0x330-0x333, irq 15, drq 4
aha0: on mca0 id 0f1f slot 2
aha0: INQUIRE failed 28
aha0: Card not responding!
device_probe_and_attach: aha0 attach returned -1
mca0: unknown card (id 0x7007, enabled) at slot 3
mca0: unknown card (id 0x6042, enabled) at slot 4
mca0: unknown card (id 0x7007, enabled) at slot 5
bt0: <BusLogic 32 Bit Bus Master MCA-to-SCSI Host Adapter (v1.50)>
bt0: io 0x334-0x337, irq 14, drq 5 on mca0 id 0708 slot 6
panic: contigmalloc1: size must not be 0
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot <--
Rebooting...
> --
> | Matthew N. Dodd | '78 Datsun 280Z | '75 Volvo 164E | FreeBSD/NetBSD |
> | [EMAIL PROTECTED] | 2 x '84 Volvo 245DL | ix86,sparc,pmax |
> | http://www.jurai.net/~winter | This Space For Rent | ISO8802.5 4ever |
>
--
:{ [EMAIL PROTECTED]
Andy Farkas
System Administrator
Speednet Communications
http://www.speednet.com.au/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
