In message <[EMAIL PROTECTED]> Greg Skafte writes:
: I've got an adaptec 1542 card using aha driver and RELENG_3 detects it no
: problems.
OK.
: If I use the adaptec on board utilities it finds my UMAX scanner no probs.
OK.
: when I try to boot the machine hangs just after the waiting for scsi to
: settle message.
Now I'm confused. Is this in -current where you are having the
problems?
: I've gabbed these as best as I can since the machine doesn't finish booting
: so I can't grab a dmesg and I don't have a serial console.....
OK.
Before going too far, please make sure that termination is currect.
I've seen the "timeout timeout ...not in timeout" sequence when that
was the case. I would have expected that from identical hardware with
a RELENG_3 kernel, however. It is possible that something in the
emulation layer in -current isn't working, or that -current's CAM does
things a little faster than RELENG_3's CAM did, this exposing another
bug in the aha driver. I didn't torture test it with anything except
slow disks and a CDROM changer... Any other device will likely work
or not work due entirely to chance.
Warner
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
