01.12.2013 03:41, Juris Kaminskis пишет:
> Hello,
>
> I have commercial software that has only binary .rpm package. It depends on
> pcscd, which depends on DBUS and HAL.
>
> This is what shows: root@:/compat/linux # truss usr/sbin/pcscd -df
>
> gettimeofday({1385854507.756325 },0x0) = 0 (0x0)
> 04667092 hotplug_libhal.c:460:HPRegisterForHotplugEvents() error:
> dbus_bus_get: org.freedesktop.DBus.Error.NoReply: Did not receive a reply.
> Possible causes include: the remote application did not send a reply, the
> message bus security policy blocked the reply, the reply timeout expired,
> or the network connection was broken.
> write(2,"\^[[36m04667092\^[[0m \^[[35mhot"...,345) = 345 (0x159)
> gettimeofday({1385854507.757039 },0x0) = 0 (0x0)
> 00000714 pcscdaemon.c:517:main() SVCServiceRunLoop returned
> write(2,"\^[[36m00000714\^[[0m \^[[35mpcs"...,78) = 78 (0x4e)
> gettimeofday({1385854507.757690 },0x0) = 0 (0x0)
> 00000651 pcscdaemon.c:523:at_exit() cleaning /var/run
> write(2,"\^[[36m00000651\^[[0m \^[[34mpcs"...,72) = 72 (0x48)
> linux_unlink(0x80593aa,0x48,0x2826bff4,0x1,0x8049dd0,0x6) = 0 (0x0)
> linux_unlink(0x8059c26,0x48,0x2826bff4,0x1,0x8049dd0,0x6) = 0 (0x0)
> linux_unlink(0x8059c3a,0x48,0x2826bff4,0x1,0x8049dd0,0x6) = 0 (0x0)
> process exit, rval = 0
>
>
> and when I run:
>
> root@:/compat/linux # truss bin/dbus-daemon --system
>
> ----
> 75000)
> linux_open("/etc/selinux/config",0x8000,0666) ERR#2 'No such file or
> directory'
> linux_statfs64(0x210b4f56,0x54,0xbfbfd9c0,0x210b4f56,0x21269ff4,0x6) = 0
> (0x0)
> linux_open("/proc/mounts",0x8000,0666) ERR#2 'No such file or directory'
> linux_open("/proc/filesystems",0x8000,0666) ERR#2 'No such file or
> directory'
Not an answer to your question, but do you have linprocfs mounted?
> Could not tell if SELinux is enabled: No such file or directory
> write(2,"Could not tell if SELinux is ena"...,64) = 64 (0x40)
> SELinux pre-initialization failed
> write(2,"SELinux pre-initialization faile"...,34) = 34 (0x22)
> process exit, rval = 1
> -----
>
> Do I have any hopes on getting DBUS and HAL working under Linux ABI? Or how
> can I try this make to work for me?
--
WBR, Boris Samorodov (bsam)
FreeBSD Committer, http://www.FreeBSD.org The Power To Serve
_______________________________________________
freebsd-emulation@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-emulation
To unsubscribe, send any mail to "freebsd-emulation-unsubscr...@freebsd.org"
