I'm having difficulties trying out the 5.2-BETA, preparing for the release. I would greatly appreciate it if anyone has some time at hand to help (re)solve a problem that occures with my 5.2-BETA kernel (26 nov
2003).
The situation is the following: I have tried to upgrade a system (http://www.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=376) from 5.1-RELEASE to 5.2-BETA, according to the src/UPDATING text (I did add the COMPAT_FREEBSD4 option to my kernel config).
buildworld went fine and so did buildkernel. After doing a installkernel and booting with the newly installed 5.2-BETA kernel (single-user), I get the following message before I get thrown in the "mount root> " prompt:
mounting root from ufs:/dev/ar0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6mount root>
Did I miss a step or have I hit something in -current?
Below is my dmesg output (working 5.1) :
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Tue Nov 25 09:49:42 GMT 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/CURRENT
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0381000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2391148112 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2391.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 1073676288 (1023 MB)
avail memory = 1039364096 (991 MB)
pnpbios: Bad PnP BIOS data checksum
Pentium Pro MTRR support enabled
acpi0: <IntelR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdec0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xb000-0xb03f mem 0xe2000000-0xe201ffff irq 12 at device 5.0 on pci2
em0: Speed:10 Mbps Duplex:Half
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xb400-0xb43f mem 0xe2020000-0xe203ffff,0xe2044000-0xe2044fff irq 10 at device 6.0 on pci2
fxp0: Ethernet address 00:0c:76:15:19:c5
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <display, VGA> at device 7.0 (no driver attached)
atapci0: <Promise PDC20276 UDMA133 controller> port 0xcc00-0xcc0f,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07 mem 0xe2040000-0xe2043fff irq 11 at device 10.0 on pci2
ata2: at 0xbc00 on atapci0
ata3: at 0xc400 on atapci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xc8000-0xd07ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ad4: 117800MB <IC35L120AVV207-1> [239340/16/63] at ata2-master UDMA100
ad6: 117800MB <IC35L120AVV207-1> [239340/16/63] at ata3-master UDMA100
ar0: 117301MB <ATA RAID1 array> [14953/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad6 at ata3-master
Opened disk ad4 -> 1
Opened disk ad6 -> 1
Opened disk ad6 -> 1
Mounting root from ufs:/dev/ar0s1a
%atacontrol list ATA channel 0: Master: no device present Slave: no device present ATA channel 1: Master: <SR244W/T01A> ATA/ATAPI rev 0 Slave: no device present ATA channel 2: Master: ad4 <IC35L120AVV207-1/V24OA66A> ATA/ATAPI rev 6 Slave: no device present ATA channel 3: Master: ad6 <IC35L120AVV207-1/V24OA66A> ATA/ATAPI rev 6 Slave: no device present
%atacontrol status 0 ar0: ATA RAID1 subdisks: ad4 ad6 status: READY
%atacontrol mode 2 Master = UDMA100 Slave = ??? %atacontrol mode 3 Master = UDMA100 Slave = ???
-- Jeroen Hogeveen, <[EMAIL PROTECTED]>
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
