For the past few weeks my -CURRENT system has been locking up. With a recent kernel (from 11/2) the following appears:
Fault trap 12: page fault while in kernel mode fault virtual address = 0x24 fault code = supervisor read, page not present instruction pointer = 0x8:0xc049d0db stack pointer = 0x10:0xe009cc88 frame pointer = 0x10:0xe009cc9c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 23 (irq10: dc0) trap number = 12 panic: page fault syncing disks, buffers remaining... 6800 6800 That bit about the current process and 'dc0' kind of makes me believe it was a dc driver issue? I may replace that card (with an ethernet card that doesn't use dc) and see if the problem goes away. Am I correct in believing this is a dc issue? If so, hope the above helps in diagnosing the problem. Otherwise... any other pointers? -Steve _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"