I can get fdisk to read the MBR, but when I try mdir, I get this trace back
(of course, no crash dump because those haven't worked for me in a year):
trap 0xc
memcpy()
ohci_softintr()
usb_schedsoftintr()
ohci_intr1()
ohci_intr()
ithread_loop()
Anyone have any clued? I'll include my dmesg, of course.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #24: Thu Sep 25 22:07:39 EDT 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/GREEN-SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0556000.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc055626c.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0556318.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc05563c4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0556470.
Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc055651c.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc05565c8.
Preloaded elf module "/boot/kernel/uhid.ko" at 0xc0556670.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc055671c.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc05567c4.
Preloaded elf module "/boot/kernel/cam.ko" at 0xc0556870.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc0556918.
Preloaded elf module "/boot/kernel/random.ko" at 0xc05569c0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0556a6c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) MP 1800+ (1533.40-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 536788992 (511 MB)
avail memory = 513359872 (489 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7M266-D> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f24a0
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #0 intpin 17 -> irq 2
IOAPIC #0 intpin 18 -> irq 5
IOAPIC #0 intpin 19 -> irq 9
agp0: <AMD 762 host to AGP bridge> port 0xe800-0xe803 mem
0xfb800000-0xfb800fff,0xfc000000-0xfdffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
IOAPIC #0 intpin 16 -> irq 10
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 768 UDMA100 controller> port 0xd800-0xd80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
amdpm0: <AMD 756/766/768 Power Management Controller> port 0xe4e0-0xe4ff at device 7.3
on pci0
smbus0: <System Management Bus> on amdpm0
smb0: <SMBus generic I/O> on smbus0
ohci0: <NEC uPD 9210 USB controller> mem 0xed800000-0xed800fff irq 2 at device 9.0 on
pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xed000000-0xed000fff irq 5 at device 9.1 on
pci0
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xec800000-0xec8000ff irq 9 at device
9.2 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 0.95
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ohci2: <OHCI (generic) USB controller> mem 0xec000000-0xec000fff irq 9 at device 0.0
on pci2
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
uhub4: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub4: 4 ports with 4 removable, bus powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
uhub5: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 5
uhub5: 4 ports with 4 removable, bus powered
umass0: SanDisk Corporation ImageMate CompactFlash USB, rev 1.10/0.09, addr 7
umass0: Get Max Lun not supported (STALLED)
pcm0: <CMedia CMI8738> port 0xc800-0xc8ff irq 2 at device 4.0 on pci2
dc0: <ADMtek AN985 10/100BaseTX> port 0xc400-0xc4ff mem 0xeb800000-0xeb8003ff irq 5 at
device 5.0 on pci2
dc0: Ethernet address: 00:20:78:0f:88:c9
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <HighPoint HPT366 UDMA66 controller> port
0xb400-0xb4ff,0xb800-0xb803,0xc000-0xc007 irq 2 at device 6.0 on pci2
atapci1: [MPSAFE]
ata2: at 0xc000 on atapci1
ata2: [MPSAFE]
atapci2: <HighPoint HPT366 UDMA66 controller> port
0xa400-0xa4ff,0xa800-0xa803,0xb000-0xb007 irq 2 at device 6.1 on pci2
atapci2: [MPSAFE]
ata3: at 0xb000 on atapci2
ata3: [MPSAFE]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xeb000000-0xeb00007f
irq 9 at device 8.0 on pci2
xl0: Ethernet address: 00:e0:18:9b:ad:9e
miibus1: <MII bus> on xl0
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found
Probing for PnP devices on ppbus0:
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xc9fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny,
logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk ad0 dp=0xc239c070
ad0: 76319MB <WDC WD800BB-32BSA0> [155061/16/63] at ata0-master UDMA100
GEOM: create disk ad1 dp=0xc239bd70
ad1: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata1-master UDMA100
acd0: CDROM <FX322M> at ata2-master PIO4
GEOM: create disk da0 dp=0xc2391c50
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk ImageMate II 1.30> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad0s2a
--
Brian Fundakowski Feldman \'[ FreeBSD ]''''''''''\
<> [EMAIL PROTECTED] \ The Power to Serve! \
Opinions expressed are my own. \,,,,,,,,,,,,,,,,,,,,,,\
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
