Petri Helenius wrote:
Related to the em driver, 82540M has not worked since sometime in 5.1-BETA time,
I filed a pr on that a few months ago but it seems the fault might be with PCI IRQ routing,
not the em driver itself.
Pete
Hartmann, O. wrote:
On Wed, 20 Aug 2003, Colin Faber wrote:
Hi.
I first swapped the Intel 1000/PRO server NIC into the next slot and up then the
machine seems to be 'stable'. Then, two days later, I changed the PSU to 400W
units.
I think it's a IRQ routing problem since we have had this problem (spontanous reboots)
from FreeBSD 4.0 on). Changing the slot for the NIC helped, but this is a very bad state.
I can not remember the error message I got when the system crashed, but it lookes like
yours and I always say the amr0-text in that message. ACPI is not working on the old
TYAN Thunder 2500 (S1867) main PCB.
I also changed machdep.cpu_idle_hlt = 0, but with no effect.
At the moment, I do not dare swapping the NIC again due to the fact the machine is in
a preliminary production state.
I also realized some weird things when creating and deleting files when the system crashed.
Crashes always could be forced by accessing samba services from a PC. Crashes always
occured when heavy IO was done, but this also could be a evidence for an IRQ problem, I think.
I do not know. The machine was 'stable' (it means: when the NIC was at the crash-causing
slot) a whole night, but whenever our department 'got started' in the morning time and heavy
IO was done, the machine froze. This changed when I swapped the NIC to another slot!!!!
And now I also have two 400W PSUs.
FreeBSD 5.1-p2 on the TYAN S1867 seems to have much more problems, but I do not know whether I
should mention this here. truss for instance crashes. We use afbackup for backing up, but
afbackup core dumps on this machine and it does not on a UP machine also running FreeBSD 5.1-p2.
It also crashes on a UP kernel on this machine.
I tried to 'truss' an afrestore call, but I had to start the tracing three or four times
because I got this error first time:
truss: PIOCWAIT: Input/output error
or something like this
root: /usr/local/samba/lib: truss -fae -o /tmp/afrestore afrestore -v -p "/usr/homes/kurs*" -C /
truss: PIOCWAIT top of loop: Input/output error
truss: PIOCWAIT top of loop: Input/output error
truss: PIOCWAIT top of loop: Input/output error
truss: PIOCWAIT top of loop: Input/output error
or sometimes truss stops lacking in a /proc/PID-XXX/mem file.
But calling it more times will 'solve' the problem.
While writing this, I crashed the system with the above showed command, this is the
error message from the kernel when the system froze (I wrote it down from the screen):
Fatal trap 12 : page fault while in kernel mode cpuid = 1; lapic.id = 00000000 fault virtual address = 0x24 fault code = supervisor read, page not present instruction pointer = 0x8:0xc01b29db stack pointer = 0x10:0xe8ff3b70 frame pointer = 0x10:0xe8ff3b84 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def 32, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 27510 (bunzip2) trap number = 12 panic: page fault cpuid = 1, lapic.id = 00000000 boot() called on cpu#1 syncing disks, buffers remaining ... panic: absolutely cannot call smp_ipi_shutdown with interrupts already disabled
cpuid = 1; lapic.id = 00000000 boot() called on cpu#1 Uptime 1d20h18m55s pfs_vncache_unload(): 6 entried remaining
Fatal double fault: eip = 0xc03134ic esp = 0xe8ff1ff8 ebp = 0xe8ff2014
cpuid = 1, lapic.id = 00000000 panic: double fault cpuid = 1, lapic.id = 00000000 boot() called on cpu#1 Uptime: 1d20h18m55s pfs_vncache_unload(): 6 entries remaining
After this, the machine was dead.
:>Hi,
:>
:>I've got nearly the same setup in a Dell 1600SC with a gig of ram and a PERC4/Sc (LSI MegaRAID) card.
:>
:>Dual 2.4GHz Xeon P4 HT CPU's and I've discovered I can lock up FreeBSD 5.1-RELEASE-p2 on command
:>simply by running something to quickly create and remove a directory. i.e.:
:>
:> perl -e 'for(my $i = 0 ; $i < 9999; $i++){ mkdir("abc"); rmdir("abc"); }'
:>
:>
:>Having machdep.cpu_idle_hlt = 0 makes no difference.
:>
:>
:>Kernel:
:> FreeBSD 5.1-RELEASE-p2 FreeBSD 5.1-RELEASE-p2 #0: Mon Aug 11 21:40:47 MDT 2003 i386
:>
:>Raid:
:> amr0: <LSILogic MegaRAID> mem 0xfcd00000-0xfcd0ffff irq 3 at device 2.0 on pci1
:> amrd0: <LSILogic MegaRAID logical drive> on amr0
:> amrd0: 34556MB (70770688 sectors) RAID 5 (optimal)
:>
:>
:>I suspect that your and my problems are more driver related to the amr driver and may be exposing
:>some other problem with in the kernels fs locking. I don't think (as others have suggested) that
:>your issue is power related, or related to the combination of hardware you're using. (Other than
:>the fact that you've got a MegaRAID card).
:>
:>The exact crash message I'm seeing is:
:>
:>panic: lockmgr: locking against myself
:>cpuid = 0; lapic.id 00000000
:>boot() called on cpu#0
:>
:>syncing disks, buffers remaining... panic: ffs_copyonwrite: recursive call
:>cpuid = 0; lapic.id 00000000
:>boot() called on cpu#0
:>Uptime: 58s
:>pfs_vncache_unload(): 7 entries remaining
:>amr0: flushing cache...done
:>Terminate ACPI
:>
:>
:>
:>Hartmann, O. wrote:
:>
:>> Dear Sirs.
:>>
:>> It seems to me a never ending story. We run a box with a TYAN Thunder
:>> 2500 Dual SMP mainboard, 2GB ECC Tyan certified memory, AMI Enterprise
:>> 1600 RAID adapter and additional Intel 1000/Pro server type (64 bit)
:>> GBit LAN NIC. With FreeBSD 4.8 this was stable, but to achive this
:>> state was really hard! It is a story similar to that what happend when
:>> we changed towards FreeBSD 5.1-RELEASE-p2 on this machine.
:>>
:>> It seems to be highly dependend in which PCI slot several cards are
:>> attached, so I will report this here also.
:>>
:>> Phenomenon:
:>>
:>> After a while the machine was running, the SMP kernel reboots
:>> spontanously. This is when heavy IO is done, compiling or, when in the
:>> morning time our department gets up and our staff connects to the samba
:>> server.
:>>
:>> Dependend on which devices are switched on or off by BIOS, the kernel
:>> freezes at the stage when the amr0 RAID got recognized. I can avoid this
:>> by enabling the built in NIC (fxp0). I can force this by putting the em0
:>> NIC into another slot, for instance in the one remaining 64BIT/66MHz
:>> slot (which should be a separate bus).
:>>
:>> This 'game' was identical to that I had with FreeBSD 4.X - 4.8 and I
:>> found out, that putting an additional NIC into PCI slot No. 2 (counted
:>> from AGP slot on) made things clear, but using both NICs together
:>> (either additional fxp0 or the new em0) remains the systems completely
:>> unstable.
:>>
:>> In FreeBSD 5.1-RELEASE-p2 and especially in FreeBSD 5.1-CURRENT this
:>> 'gambling' seems to reach its climax. My kernel is built up with
:>> SCHED_4BSD because SCHED_ULE and ADAPTIVE_MUTEXES crashes immediately
:>> the same way as described (running a while, then coredumping or freeze
:>> at the stage after the amr0-RAID showed up in the kernel boot messages,
:>> see the dmesg output below).
:>>
:>> I'm not an hardware expert, but all this wierd stuff looks like to me to be
:>> a IRQ routing problem. I fiddled around with many hand-assigned IRQ configurations,
:>> but nothing helped. Either the Intel 1000/Pro or the AMI RAID causing
:>> problems in the TYAN Thunder 2500 SMP environment.
:>>
:>> We have also a SMP machine with a similar hardware, based on an ASUS CV4X-D,
:>> AMI Elite 1600 RAID controller and the same Intel em0 1GBit NIC. OS is
:>> FreeBSD 4.8 and this system never had any problem!
:>>
:>> I feel a little bit helpless this moment, because I think I tried every trick
:>> and something seems to be wrong with the combination TYAN Thunder 2500 and FreeBSD
:>> 5.X SMP. It is also very courios, that a kernel without SMP/IO_APIC freezes after
:>> booting at the same place (amr0 RAID recognition).
:>>
:>> Is there any help outside?
:>>
:>> I attach the kernel config file and the dmesg output. Please note: I disabled both
:>> serial ports, the parallel port, sound and usb to get additional IRQs. But I have to
:>> enable the built in NIC to get a bootable, but instable FreeBSD 5.1-R box.
:>>
:>> ====================================
:>> DMESG output
:>> ====================================
:>>
:>> Copyright (c) 1992-2003 The FreeBSD Project.
:>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
:>> The Regents of the University of California. All rights reserved.
:>> FreeBSD 5.1-RELEASE-p2 #14: Wed Aug 13 09:47:00 CEST 2003
:>> [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ATMOS
:>> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0458000.
:>> Timecounter "i8254" frequency 1193182 Hz
:>> Timecounter "TSC" frequency 868644793 Hz
:>> CPU: Intel Pentium III (868.64-MHz 686-class CPU)
:>> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
:>> Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
:>> real memory = 2147483648 (2048 MB)
:>> avail memory = 2085625856 (1989 MB)
:>> Programming 16 pins in IOAPIC #0
:>> IOAPIC #0 intpin 2 -> irq 0
:>> Programming 16 pins in IOAPIC #1
:>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
:>> cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
:>> cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
:>> io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
:>> io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
:>> netsmb_dev: loaded
:>> Pentium Pro MTRR support enabled
:>> npx0: <math processor> on motherboard
:>> npx0: INT 16 interface
:>> pcibios: BIOS version 2.10
:>> Using $PIR table, 12 entries at 0xc00fdf00
:>> pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
:>> pci0: <PCI bus> on pcib0
:>> IOAPIC #1 intpin 13 -> irq 2
:>> IOAPIC #1 intpin 12 -> irq 16
:>> IOAPIC #1 intpin 2 -> irq 17
:>> IOAPIC #1 intpin 7 -> irq 18
:>> pcib1: <PCI-PCI bridge> at device 0.1 on pci0
:>> pci1: <PCI bus> on pcib1
:>> IOAPIC #1 intpin 1 -> irq 19
:>> pci1: <display, VGA> at device 0.0 (no driver attached)
:>> sym0: <896> port 0xf800-0xf8ff mem 0xfeafe000-0xfeafffff,0xfeafac00-0xfeafafff irq 2 at device 1.0 on pci0
:>> sym0: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
:>> sym0: open drain IRQ line driver, using on-chip SRAM
:>> sym0: using LOAD/STORE-based firmware.
:>> sym0: handling phase mismatch from SCRIPTS.
:>> sym1: <896> port 0xf400-0xf4ff mem 0xfeafc000-0xfeafdfff,0xfeafa800-0xfeafabff irq 16 at device 1.1 on pci0
:>> sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
:>> sym1: open drain IRQ line driver, using on-chip SRAM
:>> sym1: using LOAD/STORE-based firmware.
:>> sym1: handling phase mismatch from SCRIPTS.
:>> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xfcc0-0xfcff mem 0xfeac0000-0xfeadffff irq 17 at device 4.0 on pci0
:>> em0: Speed:1000 Mbps Duplex:Full
:>> fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xfc40-0xfc7f mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 18 at device 7.0 on pci0
:>> fxp0: Ethernet address 00:e0:81:00:f0:d7
:>> miibus0: <MII bus> on fxp0
:>> inphy0: <i82555 10/100 media interface> on miibus0
:>> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
:>> isab0: <PCI-ISA bridge> port 0x500-0x50f at device 15.0 on pci0
:>> isa0: <ISA bus> on isab0
:>> pci0: <mass storage, ATA> at device 15.1 (no driver attached)
:>> pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard
:>> pci2: <PCI bus> on pcib2
:>> pcib3: <PCI-PCI bridge> at device 2.0 on pci2
:>> pci3: <PCI bus> on pcib3
:>> IOAPIC #1 intpin 11 -> irq 20
:>> IOAPIC #1 intpin 8 -> irq 21
:>> pcib4: <PCI-PCI bridge> at device 0.0 on pci3
:>> pci4: <PCI bus> on pcib4
:>> IOAPIC #1 intpin 10 -> irq 22
:>> amr0: <LSILogic MegaRAID> mem 0xf0000000-0xf3ffffff irq 22 at device 0.0 on pci4
:>> amr0: <LSILogic MegaRAID Enterprise 1600> Firmware G170, BIOS F316, 64MB RAM
:>> pci3: <mass storage, SCSI> at device 1.0 (no driver attached)
:>> pci3: <mass storage, SCSI> at device 2.0 (no driver attached)
:>> orm0: <Option ROMs> at iomem 0xca000-0xcdfff,0xc0000-0xc9fff on isa0
:>> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
:>> fdc0: FIFO enabled, 8 bytes threshold
:>> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
:>> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
:>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
:>> kbd0 at atkbd0
:>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
:>> psm0: model IntelliMouse, device ID 3
:>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
:>> sc0: <System console> at flags 0x100 on isa0
:>> sc0: VGA <8 virtual consoles, flags=0x300>
:>> sio0: configured irq 4 not in bitmap of probed irqs 0
:>> sio0: port may not be enabled
:>> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
:>> sio0: type 8250 or not responding
:>> sio1: configured irq 3 not in bitmap of probed irqs 0
:>> sio1: port may not be enabled
:>> ppc0: parallel port not found.
:>> unknown: <PNP0303> can't assign resources (port)
:>> psmcpnp0: irq resource info is missing; assuming irq 12
:>> unknown: <PNP0700> can't assign resources (port)
:>> ppc1: parallel port not found.
:>> APIC_IO: Testing 8254 interrupt delivery
:>> APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
:>> APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
:>> Timecounters tick every 1.000 msec
:>> ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
:>> DUMMYNET initialized (011031)
:>> Waiting 5 seconds for SCSI devices to settle
:>> (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
:>> (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
:>> amrd0: <LSILogic MegaRAID logical drive> on amr0
:>> amrd0: 245014MB (501788672 sectors) RAID 5 (optimal)
:>>
:>> ===> freezing here!
:>>
:>> sa0 at sym1 bus 0 target 5 lun 0
:>> sa0: <HP C5713A H910> Removable Sequential Access SCSI-2 device
:>> sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
:>> ch0 at sym1 bus 0 target 5 lun 1
:>> ch0: <HP C5713A H910> Removable Changer SCSI-2 device
:>> ch0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
:>> ch0: 6 slots, 1 drive, 0 pickers, 0 portals
:>> SMP: AP CPU #1 Launched!
:>> Mounting root from ufs:/dev/amrd0s1a
:>> cd0 at sym0 bus 0 target 3 lun 0
:>> cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
:>> cd0: 20.000MB/s transfers (20.000MHz, offset 16)
:>> cd0: Attempt to query device size failed: NOT READY, Medium not present
:>>
:>> ========================
:>> KERNEL config file
:>> ========================
:>>
:>> machine i386
:>> cpu I686_CPU
:>> ident ATMOS
:>>
:>> options SMP # Symmetric MultiProcessor Kernel
:>> options APIC_IO # Symmetric (APIC) I/O
:>>
:>> maxusers 0
:>>
:>> hints "ATMOS.hints" #Default places to look for devices.
:>>
:>>
:>> #options COMPAT_FREEBSD4
:>> options SCHED_4BSD #4BSD scheduler
:>>
:>> #options SCHED_ULE
:>> #options ADAPTIVE_MUTEXES
:>>
:>> #options PQ_CACHESIZE=256
:>>
:>> options CPU_ENABLE_SSE
:>>
:>> options CLK_USE_TSC_CALIBRATION
:>> #options HZ=1000
:>>
:>> #makeoptions CONF_CFLAGS=-fno-builtin
:>> #options MAXDSIZ=(1024UL*1024*1024)
:>> #options MAXSSIZ=(128UL*1024*1024)
:>> #options DFLDSIZ=(1024UL*1024*1024)
:>>
:>> options GEOM_AES
:>> options GEOM_APPLE
:>> options GEOM_BDE
:>> options GEOM_BSD
:>> options GEOM_GPT
:>> options GEOM_MBR
:>> options GEOM_PC98
:>> options GEOM_SUNLABEL
:>> options GEOM_VOL
:>>
:>> options ROOTDEVNAME=\"ufs:amrd0s1a\"
:>>
:>> options INET #InterNETworking
:>> #options INET6 #IPv6 communications protocols
:>> options FFS #Berkeley Fast Filesystem
:>> options SOFTUPDATES #Enable FFS soft updates support
:>> options UFS_ACL #Support for access control lists
:>> options UFS_DIRHASH #Improve performance on big directories
:>> options NFSCLIENT #Network Filesystem Client
:>> options NFSSERVER #Network Filesystem Server
:>> options MSDOSFS #MSDOS Filesystem
:>> options CD9660 #ISO 9660 Filesystem
:>> options PROCFS #Process filesystem (requires PSEUDOFS)
:>> options PSEUDOFS #Pseudo-filesystem framework
:>> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
:>> options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
:>>
:>> options SYSVSHM #SYSV-style shared memory
:>> options SYSVMSG #SYSV-style message queues
:>> options SYSVSEM #SYSV-style semaphores
:>>
:>> options NETSMB
:>> options NETSMBCRYPTO
:>> options LIBMCHAIN
:>> options LIBICONV
:>>
:>> #options WATCHDOG
:>>
:>> options NETGRAPH
:>> #options NETGRAPH_ASYNC
:>> #options NETGRAPH_BPF
:>> #options NETGRAPH_BRIDGE
:>> #options NETGRAPH_CISCO
:>> #options NETGRAPH_ECHO
:>> #options NETGRAPH_ETHER
:>> #options NETGRAPH_FRAME_RELAY
:>> #options NETGRAPH_GIF
:>> #options NETGRAPH_GIF_DEMUX
:>> #options NETGRAPH_HOLE
:>> #options NETGRAPH_IFACE
:>> #options NETGRAPH_IP_INPUT
:>> #options NETGRAPH_KSOCKET
:>> #options NETGRAPH_L2TP
:>> #options NETGRAPH_LMI
:>> #options NETGRAPH_MPPC_ENCRYPTION
:>> #options NETGRAPH_ONE2MANY
:>> #options NETGRAPH_PPP
:>> #options NETGRAPH_PPPOE
:>> #options NETGRAPH_PPTPGRE
:>> #options NETGRAPH_RFC1490
:>> #options NETGRAPH_SOCKET
:>> #options NETGRAPH_SPLIT
:>> #options NETGRAPH_TEE
:>> #options NETGRAPH_TTY
:>> #options NETGRAPH_UI
:>> #options NETGRAPH_VJC
:>>
:>> options MROUTING
:>> options IPFIREWALL
:>> options IPFIREWALL_VERBOSE
:>> options IPFIREWALL_FORWARD
:>> #options IPFIREWALL_VERBOSE_LIMIT=100
:>> #options IPFIREWALL_DEFAULT_TO_ACCEPT
:>> #options IPV6FIREWALL
:>> #options IPV6FIREWALL_VERBOSE
:>> #options IPV6FIREWALL_VERBOSE_LIMIT=100
:>> #options IPV6FIREWALL_DEFAULT_TO_ACCEPT
:>> options IPDIVERT
:>> #options IPFILTER
:>> #options IPFILTER_LOG
:>> #options IPFILTER_DEFAULT_BLOCK
:>> options IPSTEALTH
:>>
:>> options RANDOM_IP_ID
:>>
:>> options ACCEPT_FILTER_DATA
:>> #options ACCEPT_FILTER_HTTP
:>>
:>> options TCP_DROP_SYNFIN
:>> options DUMMYNET
:>> #options BRIDGE
:>>
:>> options QUOTA
:>>
:>> options _KPOSIX_PRIORITY_SCHEDULING
:>> options P1003_1B_SEMAPHORES
:>>
:>> #options MAC
:>> #options MAC_BIBA
:>> #options MAC_BSDEXTENDED
:>> #options MAC_DEBUG
:>> #options MAC_IFOFF
:>> #options MAC_LOMAC
:>> #options MAC_MLS
:>> #options MAC_NONE
:>> #options MAC_PARTITION
:>> #options MAC_SEEOTHERUIDS
:>> #options MAC_TEST
:>>
:>> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
:>>
:>> device isa
:>> #options AUTO_EOI_1
:>>
:>> device pci
:>>
:>> device agp
:>>
:>> # Floppy drives
:>> device fdc
:>>
:>> # SCSI Controllers
:>> device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
:>> #device ahc
:>>
:>> # SCSI peripherals
:>> device scbus # SCSI bus (required)
:>> device ch # SCSI media changers
:>> device da # Direct Access (disks)
:>> device sa # Sequential Access (tape etc)
:>> device cd # CD
:>> device pass # Passthrough device (direct SCSI access)
:>> device ses # SCSI Environmental Services (and SAF-TE)
:>>
:>>
:>> # RAID controllers
:>> device amr # AMI MegaRAID
:>>
:>>
:>> #options CHANGER_MIN_BUSY_SECONDS=2
:>> #options CHANGER_MAX_BUSY_SECONDS=10
:>>
:>> #options SA_IO_TIMEOUT=4
:>> #options SA_SPACE_TIMEOUT=60
:>> #options SA_REWIND_TIMEOUT=(2*60)
:>> #options SA_ERASE_TIMEOUT=(4*60)
:>> #options SA_1FM_AT_EOD
:>>
:>> #options SCSI_PT_DEFAULT_TIMEOUT=60
:>> options SES_ENABLE_PASSTHROUGH
:>>
:>>
:>> # atkbdc0 controls both the keyboard and the PS/2 mouse
:>> device atkbdc # AT keyboard controller
:>> device atkbd # AT keyboard
:>> options ATKBD_DFLT_KEYMAP
:>> makeoptions ATKBD_DFLT_KEYMAP=us.iso
:>>
:>> device psm # PS/2 mouse
:>>
:>> device vga # VGA video card driver
:>>
:>> device splash # Splash screen and screen saver support
:>>
:>> # syscons is the default console driver, resembling an SCO console
:>> device sc
:>> options MAXCONS=8
:>>
:>> #options SC_ALT_MOUSE_IMAGE
:>> options SC_DFLT_FONT
:>> makeoptions SC_DFLT_FONT=cp850
:>>
:>> options SC_DISABLE_DDBKEY
:>> options SC_DISABLE_REBOOT
:>> options SC_HISTORY_SIZE=512
:>> #options SC_MOUSE_CHAR=0x3
:>> options SC_PIXEL_MODE
:>> options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
:>> options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
:>> options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
:>> options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
:>> #options SC_CUT_SPACES2TABS
:>> #options SC_CUT_SEPCHARS=\"x09\"
:>> #options SC_TWOBUTTON_MOUSE
:>> #options SC_NO_CUTPASTE
:>> #options SC_NO_FONT_LOADING
:>> #options SC_NO_HISTORY
:>> #options SC_NO_SYSMOUSE
:>> #options SC_NO_SUSPEND_VTYSWITCH
:>>
:>> device npx
:>>
:>> #device pmtimer
:>>
:>> #device sio # 8250, 16[45]50 based serial ports
:>>
:>> # Parallel port
:>> #device ppc
:>> #device ppbus # Parallel port bus (required)
:>> #device lpt # Printer
:>> #device plip # TCP/IP over parallel
:>> #device ppi # Parallel port interface device
:>> #device vpo # Requires scbus and da
:>>
:>>
:>> device miibus # MII bus support
:>> device em
:>> #device fxp # Intel EtherExpress PRO/100B (82557, 82558)
:>>
:>> device random # Entropy device
:>> device loop # Network loopback
:>> device ether # Ethernet support
:>> #device tun # Packet tunnel.
:>> device pty # Pseudo-ttys (telnet etc)
:>> #device gif # IPv6 and IPv4 tunneling
:>> #device faith # IPv6-to-IPv4 relaying (translation)
:>>
:>> device bpf # Berkeley packet filter
:>>
:>>
:>> ------------------
:>>
:>>
:>> Thanks a lot for your help,
:>>
:>> Oliver
:>> --
:>> MfG
:>> O. Hartmann
:>>
:>> [EMAIL PROTECTED]
:>> ------------------------------------------------------------------
:>> Systemadministration des Institutes fuer Physik der Atmosphaere (IPA)
:>> ------------------------------------------------------------------
:>> Johannes Gutenberg Universitaet Mainz
:>> Becherweg 21
:>> 55099 Mainz
:>>
:>> Tel: +496131/3924662 (Maschinenraum)
:>> Tel: +496131/3924144 (Buero)
:>> FAX: +496131/3923532
:>> _______________________________________________
:>> [EMAIL PROTECTED] mailing list
:>> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
:>> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
:>>
:>>
:>
:>
-- MfG O. Hartmann
[EMAIL PROTECTED] ------------------------------------------------------------------ Systemadministration des Institutes fuer Physik der Atmosphaere (IPA) ------------------------------------------------------------------ Johannes Gutenberg Universitaet Mainz Becherweg 21 55099 Mainz
Tel: +496131/3924662 (Maschinenraum)
Tel: +496131/3924144 (Buero)
FAX: +496131/3923532
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-smp
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-smp To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
