On Tue, Jun 10, 2003 at 09:19:08PM -0500, [EMAIL PROTECTED] wrote: > FWIW - I have a Samsung SM-348 48x CD/DVD combo unit that works just > fine under 5.1 (and 4.8): > > acd0: CD-RW <SAMSUNG CDRW/DVD SM-348B> at ata0-master PIO4
Yes, i have 48X SAMSUNG CD-ROM SC-148T, and it works fine under 5.1 and 4.8 Maybe only 52X Samsung SC-152 is broken for FreeBSD. > > On 10 Jun, Vitaly Markitantov wrote: > > On Mon, Jun 09, 2003 at 10:20:03PM +0200, Per von Zweigbergk wrote: > >> Hello. > >> > >> I'm having difficulty with the ISO image of FreeBSD 5.1. The same > >> problem also appeared in 5.0, but since 5.1 had come out, I decided to > >> try that before reporting this bug. > >> > >> When booting the installer off the CD-ROM and doing a Standard install, > >> you first get to the stage of partitioning a hard drive. > >> > >> Then you get to the stage where distributions are chosen. > >> > >> After that, it wants you to choose install media. I choose CD/DVD, and > >> suddenly it says: > >> > >> "No CD/DVD devices found!" > >> > >> This is strange, since I clearly have been able to boot from it, and > >> the boot loader seems to find it. > >> > >> On a whim, I also tried to choose "Floppy" for the install, but that > >> didn't work either: > >> > >> "No floppy devices found!" > >> > >> This is more than strange. It's truly bizarre. > >> > >> In the boot loader it says: > >> > >> BIOS CD is cd0 > >> BIOS drive A: is disk0 > >> BIOS drive C: is disk1 > >> > >> And just before it dumps into /stand/sysinstall, I get: > >> > >> ata1-master: timeout waiting for interrupt > >> ata1-master: ATAPI identify failed > >> > >> The system is new, and has had no OS installed on it previously. I have > >> upgraded the BIOS to the latest version. > >> > >> Specifications: > >> > >> - Microstar 865PE Neo2 LS mother board > >> - 3 x Intel 10/100 Desktop Adapter S cards. (Supported by the fxp > >> driver) > >> - Cheap Geforce 4 MX based AGP graphics card > >> - Western Digital Special Edition 120 GB hard drive with 8 MB disk > >> cache connected using the onboard ATA100 functionality. Master on the > >> first IDE bus. > >> - Samsung CD-ROM drive connected to the second IDE bus as Master. Only > >> does ATA33 with the cables I use. > > > > Looks like Samsung 52X CD-ROM is broken for FreeBSD, i have this problem > > with this drive, when i replace it to Asus 52X CD-ROM, all works fine. > > > > > > _______________________________________________ > [EMAIL PROTECTED] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Vitaly Markitantov mailto: [EMAIL PROTECTED] _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
