I've got a cheesy cigar-pro USB flash-drive (256MB) that works fine on current (as of last night)
> -- Thus, Richard Nyberg had said: > Hello current-users! > > I'm not having any luck getting my USB flash drive to work. > The machine runs current as of today (24:th feb). > Below is the output I get when I connect the drive. > Does anyone have any ideas? > > -Richard > > ---- > usbd_new_device bus=0xc404a000 port=2 depth=1 speed=2 > usbd_new_device: adding unit addr=2, rev=110, class=0, subclass=0, > protocol=0, maxpacket=64, len=18, speed=2 usbd_new_device: new dev (addr > 2), dev=0xc4178d80, parent=0xc4059f00 usbd_probe_and_attach: trying > device specific drivers > usbd_probe_and_attach: no device specific driver found > usbd_probe_and_attach: looping over 1 configurations > usbd_set_config_index: status=0x0001, error=NORMAL_COMPLETION > usbd_set_config_index: (addr 1) cno=2 attr=0xc0, selfpowered=1, > power=100 usbd_set_config_index: set config 1 > umass0: Creative Tech NOMAD MuVo, rev 1.10/0.01, addr 2 > umass0: SCSI over Bulk-Only; quirks = 0x000 > umass0: Get Max Lun not supported (IOERROR) > umass0:0:0:-1: Attached to scbus0 as device 0 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <CREATIVE NOMAD_MUVO 0001> Removable Direct Access SCSI-4 device > da0: 1.000MB/s transfers > da0: 125MB (256001 512 byte sectors: 64H 32S/T 125C) > umass0: BBB reset failed, IOERROR > umass0: BBB bulk-in clear stall failed, IOERROR > umass0: BBB bulk-out clear stall failed, IOERROR > [ Many repetitions of the umass0: triplet above... ] > Opened disk da0 -> 5 > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-current" in the body of the message Virtually, Ned Wolpert <[EMAIL PROTECTED]> "An idea is something you have; an ideology is something that has you." --Morris Berman To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
