Re: Wavelan problems

[James Satterfield]

Just a suggestion. Do not set media autoselect. Set it to DS/11Mbps 
mediaopt adhoc or something. This still gives me a TON of tx timeouts, 
but the card works. I've only had the problem you're seeing when I set 
media autoselect.

James.

Maikel Verheijen wrote:
Since I deleted the original email of Michael Bretterklieber, I can't
actually reply anymore :(
This is what I would have replied:

I can say nothing more than "me too", with a Lucent pC24E-H-ET, a generic
lucent silver card.
Dmesg info:
wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on
pccard0
wi0: 802.11 address: 00:02:2d:0c:e1:24
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (7.28.1)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
And exact the same wicontrol output. 

I would like to add that, on enabeling the card (ifconfig wi0 up), my
machine practically freezes, and when I pull the card out, I got my machine
back most of the time...
Dmesg info after doing "ifconfig wi0 up":

wi0: timeout in wi_cmd 0x0002; event status 0x0080
wi0: timeout in wi_cmd 0x0000; event status 0x0080
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: init failed
wi0: timeout in wi_seek to fc00/0
wi0: timeout in wi_seek to fc81/0
wi0: timeout in wi_seek to fc0c/0
wi0: timeout in wi_seek to fc02/0
wi0: timeout in wi_seek to fc03/0
wi0: timeout in wi_seek to fc04/0
wi0: timeout in wi_seek to fc01/0
wi0: timeout in wi_seek to fc09/0
wi0: timeout in wi_seek to fc07/0
wi0: timeout in wi_seek to fc83/0
wi0: timeout in wi_seek to fc06/0
wi0: timeout in wi_seek to fc25/0
wi0: timeout in wi_seek to fc84/0
wi0: timeout in wi_seek to fc0e/0
wi0: timeout in wi_seek to fc85/0
wi0: timeout in wi_seek to fc20/0
wi0: timeout in wi_seek to fc80/0
wi0: wi_cmd: busy bit won't clear.
wi0: failed to allocate 2372 bytes on NIC
wi0: tx buffer allocation failed (error 12)
wi0: interface not running
wi0: wi_cmd: busy bit won't clear.
wi0: detached
(got this after unplugging the wi-card, to un-freeze the card.

Kind regards,

Maikel Verheijen



Kind regards,
   Maikel Verheijen
USER, n.:
        The word computer professionals use when they mean "idiot."
                -- Dave Barry, "Claw Your Way to the Top"
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message