Scott
Victor Ponomarev wrote:
Hi All. It's seems that smp kernel configuration doesn't work correctly on Intel SE7500WV2 motherboard with 2 xeon processors in 5.0-RELEASE.Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0673000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06730a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2592366912 Hz CPU: Pentium 4 (2592.37-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xffffffffbfebfbff> real memory = 2147418112 (2047 MB) avail memory = 2083561472 (1987 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled ACPI-0625: *** Warning: Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [LEDP] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [GPEN] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [GPST] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [WUES] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [WUSE] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [SBID] had invalid type (String) for Scope operator, changed to (Scope) ACPI-0625: *** Warning: Type override - [SWCE] had invalid type (String) for Scope operator, changed to (Scope) npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE47 Using $PIR table, 19 entries at 0xc00f3070 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 acpi_cpu2: on acpi0 acpi_cpu3: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: at device 0.1 (no driver attached) pcib1: at device 3.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P5 - AE_NOT_FOUND pci2: on pcib1 pci2: at device 28.0 (no driver attached) pcib2: at device 29.0 on pci2 pci4: on pcib2 pci2: at device 30.0 (no driver attached) pcib3: at device 31.0 on pci2 pci3: on pcib3 em0: port 0x2040-0x207f mem 0xfeac0000-0xfeadffff irq 10 at device 7.0 on pci3 em0: Speed:N/A Duplex:N/A em1: port 0x2000-0x203f mem 0xfeae0000-0xfeafffff irq 10 at device 7.1 on pci3 em1: Speed:N/A Duplex:N/A pci0: at device 3.1 (no driver attached) pcib4: at device 30.0 on pci0 pci1: on pcib4 atapci0: port 0x1420-0x142f,0x140c-0x140f,0x1410-0x1417,0x1408-0x140b,0x1400-0x1407 mem 0xfe9e0000-0xfe9e3fff irq 9 at device 2.0 on pci1 ata2: at 0x1400 on atapci0 ata3: at 0x1410 on atapci0 pci1: at device 12.0 (no driver attached) isab0: at device 31.0 on pci0 isa0: on isab0 atapci1: port 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 pci0: at device 31.3 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 acpi_ec0: port 0xca7,0xca6 on acpi0 fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: cmd 3 failed at out byte 1 of 3 orm0: at iomem 0xd3000-0xd47ff,0xd1800-0xd2fff,0xc8000-0xd17ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 fdc0: at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: parallel port not found. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: CDROM at ata1-master PIO4 ar0: 76319MB [9729/255/63] status: READY subdisks: 0 READY ad4: 76319MB [155061/16/63] at ata2-master UDMA100 ar1: 78533MB [10011/255/63] status: READY subdisks: 0 READY ad6: 78533MB [159560/16/63] at ata3-master UDMA100 Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad4 -> 16 Opened disk ad6 -> 16 Opened disk ad6 -> 16 Mounting root from ufs:/dev/ar0s1a To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
