hi, got no useful response from -mobile so re-posting to -current:
i am having problems with 5.0-REL on an ibm thinkpad 600x.the xl
driver for my 3com 3ccfe575ct writes the following message to the
console "xl0: watchdog timeout".
after skimming through newsgroups i found out that it has
something to the with irq mapping. the cardbus controller uses
irq11. my first try was to disable the usb-controller because it
uses irq11 too. no luck!
a boot -v shows me that a hole bunch of pci devices uses irq11...
the problem is that the network connection is _very_ slow. i
think its because of the irq conflict. had anyone the same
problems before?
i also tried a different card (3com 3cxfe575bt) - same effect.
removing the card from the pcmcia slot prompts:
"xl0: command never completed!" and
"xl0: reset didn't complete"
find attached:
- pciconf -v -l
- boot -v with usb
- boot -v w/o usb
thanks for any help
toni
--
Terror ist der Krieg der Armen, | [EMAIL PROTECTED]
Krieg ist der Terror der Reichen. | Toni Schmidbauer
- Sir Peter Ustinov |
agp0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
class = bridge
subclass = PCI-PCI
cbb0@pci0:2:0: class=0x060700 card=0x01301014 chip=0xac1b104c rev=0x03 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1450 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
cbb1@pci0:2:1: class=0x060700 card=0x01301014 chip=0xac1b104c rev=0x03 hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI1450 PC card CardBus Controller'
class = bridge
subclass = PCI-CardBus
none0@pci0:3:0: class=0x078000 card=0x018c1014 chip=0x044911c1 rev=0x01 hdr=0x00
vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
device = 'LT Winmodem 56k'
class = simple comms
none1@pci0:6:0: class=0x040100 card=0x01531014 chip=0x60031013 rev=0x01 hdr=0x00
vendor = 'Cirrus Logic'
device = 'Crystal CS4610/14/22/24/30 SoundFusion PCI Audio Accelerator'
class = multimedia
subclass = audio
isab0@pci0:7:0: class=0x068000 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-unknown
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01
hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
none2@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
none3@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
subclass = PCI-unknown
none4@pci1:0:0: class=0x030000 card=0x01521014 chip=0x000610c8 rev=0x00 hdr=0x00
vendor = 'Neomagic Corporation'
device = 'NM2360 MagicMedia 256ZX / 256M6D'
class = display
subclass = VGA
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #1: Thu Jan 23 13:35:57 GMT 2003
root@castrop:/usr/obj/usr/src/sys/wasnix
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04c9000.
Calibrating clock(s) ... TSC clock: 498275308 Hz, i8254 clock: 1193192 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
TSC initialization skipped: APM enabled.
CPU: Pentium III/Pentium III Xeon/Celeron (498.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134021120 (127 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004f0000 - 0x07fc7fff, 128811008 bytes (31448 pages)
avail memory = 125018112 (119 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry = f0000:e724 Rev = 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 6 entries at 0xc00f9d00
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x62 3 4 5 6 7 9 10 11 12 14 15
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 40000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0xa210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 50103000, size 12, enabled
found-> vendor=0x104c, dev=0xac1b, revid=0x03
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50102000, size 12, enabled
found-> vendor=0x104c, dev=0xac1b, revid=0x03
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50101000, size 8, enabled
map[14]: type 4, range 32, base 00004500, size 3, enabled
map[18]: type 4, range 32, base 00004400, size 8, enabled
found-> vendor=0x11c1, dev=0x0449, revid=0x01
bus=0, slot=3, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x8290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base 50100000, size 12, enabled
map[14]: type 1, range 32, base 50000000, size 20, enabled
found-> vendor=0x1013, dev=0x6003, revid=0x01
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00004000, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x03
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x43ffffff at device
0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0x70000000-0xdfffffff
pcib1: prefetched decode 0xe0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e0000000, size 25, enabled
map[14]: type 1, range 32, base 70000000, size 22, enabled
map[18]: type 1, range 32, base 70400000, size 20, enabled
found-> vendor=0x10c8, dev=0x0006, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at device 2.0 on
pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.1 on
pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 3.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
ata1: mask=03 ostat0=51 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 18 devices, largest 122 bytes
PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x8f, size=0x10, align=0x1
PNP0200: adding fixed io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x73, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 6 device ID IBM3780 (80374d24)
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x80
PNP0700: adding dma mask 0x4
pnpbios: handle 8 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x22-0x22, size=0x1, align=0
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0
PNP0c02: adding io range 0xef00-0xefaf, size=0xb0, align=0
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c02: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x3bc-0x3bf, size=0x4, align=0
pnpbios: handle 11 device ID PNP0400 (0004d041)
pnpbios: handle 13 device ID PNP0501 (0105d041)
IBM0071: adding irq mask 0x10
IBM0071: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
IBM0071: adding dma mask 0x8
pnpbios: handle 14 device ID IBM0071 (71004d24)
PNP0e03: adding io range 0-0x1, size=0x2, align=0
pnpbios: handle 15 device ID PNP0e03 (030ed041)
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0
PNP0680: adding io range 0x3f6-0x3f7, size=0x2, align=0
PNP0680: adding io range 0xfcf0-0xfcf7, size=0x8, align=0
pnpbios: handle 18 device ID PNP0680 (8006d041)
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x170-0x177, size=0x8, align=0
PNP0680: adding io range 0x376-0x376, size=0x1, align=0
PNP0680: adding io range 0xfcf8-0xfcff, size=0x8, align=0
pnpbios: handle 20 device ID PNP0680 (8006d041)
pnpbios: handle 22 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x4d0-0x4d1,0xb2-0xb3,0x92,0x2e-0x2f,0x22 iomem
0xffff0000-0xffffffff,0x100000-0x7ffffff,0xf0000-0xfffff,0-0x9ffff on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x3bc-0x3bf on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <IBM0071> can't assign resources (port)
unknown: <IBM0071> at port 0x3f8-0x3ff on isa0
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0e03> at port 0-0x1 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x170-0x177 on isa0
BIOS Geometries:
0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
found-> vendor=0x10b7, dev=0x5257, revid=0x10
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=255
Manufacturer ID: 01015752
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575CT | LAN Cardbus Card | 004 |
Functions: Network Adaptor, Memory
CIS reading done
cardbus1: Resource not specified in CIS: id=14, size=80
cardbus1: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x103f mem
0x88000000-0x8800007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus1
xl0: Ethernet address: 00:01:02:bd:2b:ef
xl0: media options word: 40
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00c000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IBM-DARA-212000/AR4IA52A> ATA-4 disk at ata0-master
ad0: 11509MB (23572080 sectors), 24944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-1902B/1717> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s1, start 32256 length 4722246144 end 4722278399
GEOM: Configure ad0s2, start 4722278400 length 7346626560 end 12068904959
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s2c, start 0 length 7346626560 end 7346626559
GEOM: Configure ad0s2d, start 402653184 length 3145728000 end 3548381183
GEOM: Configure ad0s2e, start 3548381184 length 2097152000 end 5645533183
GEOM: Configure ad0s2f, start 5645533184 length 1701093376 end 7346626559
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
splash: image decoder found: daemon_saver
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Thu Jan 23 10:50:48 GMT 2003
root@castrop:/usr/obj/usr/src/sys/wasnix
Preloaded elf kernel "/boot/kernel/kernel" at 0xc062b000.
Calibrating clock(s) ... TSC clock: 498272908 Hz, i8254 clock: 1193186 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
TSC initialization skipped: APM enabled.
CPU: Pentium III/Pentium III Xeon/Celeron (498.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134021120 (127 MB)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00652000 - 0x07fc7fff, 127361024 bytes (31094 pages)
avail memory = 123564032 (117 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry = f0000:e724 Rev = 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
Initializing GEOMetry subsystem
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 6 entries at 0xc00f9d00
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 6 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x62 3 4 5 6 7 9 10 11 12 14 15
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 40000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0xa210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 50103000, size 12, enabled
found-> vendor=0x104c, dev=0xac1b, revid=0x03
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50102000, size 12, enabled
found-> vendor=0x104c, dev=0xac1b, revid=0x03
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50101000, size 8, enabled
map[14]: type 4, range 32, base 00004500, size 3, enabled
map[18]: type 4, range 32, base 00004400, size 8, enabled
found-> vendor=0x11c1, dev=0x0449, revid=0x01
bus=0, slot=3, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x8290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D2 D3 current D0
map[10]: type 1, range 32, base 50100000, size 12, enabled
map[14]: type 1, range 32, base 50000000, size 20, enabled
found-> vendor=0x1013, dev=0x6003, revid=0x01
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00004000, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x03
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x43ffffff at device
0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0x70000000-0xdfffffff
pcib1: prefetched decode 0xe0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e0000000, size 25, enabled
map[14]: type 1, range 32, base 70000000, size 22, enabled
map[18]: type 1, range 32, base 70400000, size 20, enabled
found-> vendor=0x10c8, dev=0x0006, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at device 2.0 on
pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.1 on
pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <simple comms> at device 3.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
ata1: mask=03 ostat0=51 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4000-0x401f irq 11 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 18 devices, largest 122 bytes
PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
PNP0200: adding fixed io range 0x80-0x8f, size=0x10, align=0x1
PNP0200: adding fixed io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding fixed io range 0x70-0x73, size=0x4, align=0x1
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding irq mask 0x2
PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0303 (0303d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 6 device ID IBM3780 (80374d24)
PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0700: adding irq mask 0x40
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x80
PNP0700: adding dma mask 0x4
pnpbios: handle 8 device ID PNP0700 (0007d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x22-0x22, size=0x1, align=0
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0
PNP0c02: adding io range 0xef00-0xefaf, size=0xb0, align=0
PNP0c02: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c02: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000
PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x3bc-0x3bf, size=0x4, align=0
pnpbios: handle 11 device ID PNP0400 (0004d041)
pnpbios: handle 13 device ID PNP0501 (0105d041)
IBM0071: adding irq mask 0x10
IBM0071: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
IBM0071: adding dma mask 0x8
pnpbios: handle 14 device ID IBM0071 (71004d24)
PNP0e03: adding io range 0-0x1, size=0x2, align=0
pnpbios: handle 15 device ID PNP0e03 (030ed041)
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0
PNP0680: adding io range 0x3f6-0x3f7, size=0x2, align=0
PNP0680: adding io range 0xfcf0-0xfcf7, size=0x8, align=0
pnpbios: handle 18 device ID PNP0680 (8006d041)
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x170-0x177, size=0x8, align=0
PNP0680: adding io range 0x376-0x376, size=0x1, align=0
PNP0680: adding io range 0xfcf8-0xfcff, size=0x8, align=0
pnpbios: handle 20 device ID PNP0680 (8006d041)
pnpbios: handle 22 device ID PNP0c02 (020cd041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing
probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing
probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing
probe.
adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing
probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing
probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing
probe.
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing
probe.
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x22 iomem
0xffff0000-0xffffffff,0x100000-0x7ffffff,0xf0000-0xfffff,0-0x9ffff on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x3bc-0x3bf on isa0
unknown: <16550A-compatible COM port> failed to probe on isa0
unknown: <IBM0071> can't assign resources (port)
unknown: <IBM0071> at port 0x3f8-0x3ff on isa0
unknown: <PNP0e03> can't assign resources (port)
unknown: <PNP0e03> at port 0-0x1 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x170-0x177 on isa0
BIOS Geometries:
0:03feef3f 0..1022=1023 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
found-> vendor=0x10b7, dev=0x5257, revid=0x10
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=255
Manufacturer ID: 01015752
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575CT | LAN Cardbus Card | 004 |
Functions: Network Adaptor, Memory
CIS reading done
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575C Fast Etherlink XL> port 0x1000-0x103f mem
0x88000000-0x8800007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus0
xl0: Ethernet address: 00:01:02:bd:2b:ef
xl0: media options word: 40
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00c000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
ad0: success setting UDMA2 on Intel chip
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad0: <IBM-DARA-212000/AR4IA52A> ATA-4 disk at ata0-master
ad0: 11509MB (23572080 sectors), 24944 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <TOSHIBA CD-ROM XM-1902B/1717> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: Configure ad0s1, start 32256 length 4722246144 end 4722278399
GEOM: Configure ad0s2, start 4722278400 length 7346626560 end 12068904959
GEOM: Add ad0s2 hot[0] start 512 length 276 end 787
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 268435456 end 402653183
GEOM: Configure ad0s2c, start 0 length 7346626560 end 7346626559
GEOM: Configure ad0s2d, start 402653184 length 3145728000 end 3548381183
GEOM: Configure ad0s2e, start 3548381184 length 2097152000 end 5645533183
GEOM: Configure ad0s2f, start 5645533184 length 1701093376 end 7346626559
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
splash: image decoder found: daemon_saver
xl0: watchdog timeout
xl0: watchdog timeout
xl0: watchdog timeout
msg51032/pgp00000.pgp
Description: PGP signature
