Trial upgrade from a laptop running stable just fine for the last
six months to current (GENERIC) is still failing with the same symptoms:
On board rl0 comes up just fine, but a transfer hangs
after about 150KB or so. After a minute or two, the laptop reboots.
That's at 100BaseTX, plus the various mediaopts. At 10BaseT,
it takes longer during a file transfer to trigger the problem, but
it gets there after a megabyte or so.
I've attached a dmesg, interesting "lock order reversal" item in it.
I'm willing to dedicate a week or so to get this thing up because it's
one of those ACPI only laptops.
Tell me what to do to get better info...
Thank you,
Russell
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Jan 17 08:55:47 MST 2003
[EMAIL PROTECTED]:/usr/obj/usr/src-current/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c3000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c30a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1991920132 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz (1991.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 520093696 (496 MB)
avail memory = 497917952 (474 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
Using $PIR table, 7 entries at 0xc00fdf50
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xe8ffffff at device 0.0
on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe9000000-0xe9000fff irq 11 at device
2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Mitsumi Mitsumi Quick Scroll Mouse (USB), rev 1.00/1.05, addr 2, iclass
3/1
ums0: 3 buttons and Z dir.
ohci1: <SiS 5571 USB controller> mem 0xe9001000-0xe9001fff irq 10 at device
2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0x1000-0x100f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 2.7 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0x6004800-0x60048ff
irq 11 at device 10.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:90:f5:12:59:3b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <serial bus, FireWire> at device 11.0 (no driver attached)
cbb0: <TI1410 PCI-CardBus Bridge> mem 0x88000000-0x88000fff irq 5 at device
12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling available, 8 steps from 100% to 12.5%
ad0: 28615MB <TOSHIBA MK3017GAP> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <DW-28E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
lock order reversal
1st 0xc4013068 process lock (process lock) @ /usr/src-current/src/sys/kern/ker
n_descrip.c:2100
2nd 0xc4030134 filedesc structure (filedesc structure) @
/usr/src-current/src/sys/kern/kern_descrip.c:2107
rl0: discard oversize frame (ether type fbf7 flags 3 len 2992 > max 1514)
rl0: discard oversize frame (ether type fbf7 flags 3 len 2992 > max 1514)
rl0: discard oversize frame (ether type 2e3d flags 3 len 55442 > max 1514)
rl0: discard oversize frame (ether type 904 flags 3 len 36106 > max 1514)
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x46
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc02f19c0
stack pointer = 0x10:0xd9344ca4
frame pointer = 0x10:0xd9344cbc
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 832 (reboot)
trap number = 12
panic: page fault
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
