This is not surprising, ACPI also fails on my FIC motherboard,
I lost floppy drive when I enable ACPI, fdc0 can not allocate resources,
sigh.
David Xu
--
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #26: Wed Jan 15 11:40:50 CST 2003
[EMAIL PROTECTED]:/usr/home/davidxu/src/sys/i386/compile/xu
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06c5000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc06c50a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06c5154.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 501139221 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 469696512 (447 MB)
avail memory = 448995328 (428 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0678ca2 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FIC FB11 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 7 entries at 0xc00fddc0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
ACPI-1287: *** Error: Method execution failed, AE_AML_UNINITIALIZED_LOCAL
can't fetch resources for \\_SB_.PCI0.FDC0 - AE_AML_UNINITIALIZED_LOCAL
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device
0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 10 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xd9000000-0xd90000ff irq 5 at
device 10.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:e0:4c:6b:dc:5e
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: cannot reserve I/O port range (1 ports)
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model 4D+ Mouse, device ID 8
fdc0: cannot reserve I/O port range (1 ports)
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: cannot reserve I/O port range (6 ports)
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 14655MB <Maxtor 31536H2> [29777/16/63] at ata0-master UDMA33
ad2: 14655MB <Maxtor 31536U2> [29777/16/63] at ata1-master UDMA33
acd0: CDROM <SAMSUNG CD-ROM SC-140H> at ata1-slave PIO4
MBREXT Slice 5 on ad0s2:
0000 00 01 81 0b 83 fe ff ff 3f 00 00 00 f1 45 89 00 |........?....E..|
[0] f:00 typ:131 s(CHS):11/1/129 e(CHS):255/254/255 s:63 l:8996337
0000 00 fe ff ff 05 fe ff ff 30 46 89 00 be 32 0f 00 |........0F...2..|
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:8996400 l:996030
MBREXT Slice 6 on ad0s2:
0000 00 fe ff ff 82 fe ff ff 3f 00 00 00 7f 32 0f 00 |........?....2..|
[0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:995967
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s3a
lock order reversal
1st 0xc3a0dce0 process lock (process lock) @ ../../../kern/kern_descrip.c:2100
2nd 0xc3aad634 filedesc structure (filedesc structure) @
../../../kern/kern_descrip.c:2107
R{.n+zwfj)mfhkyR+a{.n+盱.)w* z
