Here is another machine that the ISO for 5.0-RC3 x86 won't boot on.
The hardware is a SGI VW 230 (mostly ACER hardware based on the VIA chipset).
I've attached some detailed information out about both machines from
the linux point of view. Hope that it helps.
Cheers,
Ryan
> Still no luck. I pulled both cards and with our with out ACPI, the system
> stops at:
>
> pci_cfgintr: 0:7 INTD routed to irq 14
>
> Cheers,
> Ryan
>
> > It would probably help to know there is an Intel EtherExpress/100 card as
> > well as a PCI Voodoo3 Video Card in the system.
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
# dmesg output
Linux version 2.4.18-19.8.0 ([EMAIL PROTECTED]) (gcc version 3.2
20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Dec 12 05:39:29 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000004ffe0000 (usable)
BIOS-e820: 000000004ffe0000 - 000000004ffe8000 (ACPI data)
BIOS-e820: 000000004ffe8000 - 0000000050000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
383MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 327648
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 98272 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 731.465 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 1447.13 BogoMIPS
Memory: 1284860k/1310592k available (1314k kernel code, 21120k reserved, 989k data,
172k init, 393088k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 32768 (order: 6, 262144 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=161135 max_file_pages=0 max_inodes=0 max_dentries=161135
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0220, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 1024 slots per queue, batch=256
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0x5cc0-0x5cc7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x5cc8-0x5ccf, BIOS settings: hdc:DMA, hdd:DMA
hdc: CD-ROM 48X/AKU, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 0.99.newide
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 253k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
PCI: Assigned IRQ 11 for device 00:0b.0
PCI: Sharing IRQ 11 with 00:07.2
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 29160N Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
blk: queue c3a22814, I/O limit 4095Mb (mask 0xffffffff)
Vendor: IBM Model: DDYS-T18350N Rev: S96H
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c3a22e14, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:2:0: Tagged Queuing enabled. Depth 253
Attached scsi disk sda at scsi0, channel 0, id 2, lun 0
(scsi0:A:2): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
Partition check:
sda: sda1 sda2
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 172k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 05:47:42 Dec 12 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:0b.0
usb-uhci.c: USB UHCI at I/O 0x5c80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: USB new device connect on bus1/2, assigned device number 2
EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,2), internal journal
usb-uhci.c: interrupt, status 3, frame# 558
input0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)]
on usb1:2.0
Adding Swap: 995988k swap-space (priority -1)
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
ohci1394: pci_module_init failed
ip_tables: (C) 2000-2002 Netfilter core team
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<[EMAIL PROTECTED]> and others
PCI: Found IRQ 10 for device 00:0d.0
divert: allocating divert_blk for eth0
eth0: OEM i82557/i82558 10/100 Ethernet, 00:00:E2:30:04:AB, IRQ 10.
Board assembly 727095-004, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
divert: not allocating divert_blk for non-ethernet device cipsec0
Cisco Systems VPN Client Version 3.7.2 (Rel) kernel module loaded
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: console ready
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4191 Mon Dec 9
11:49:01 PST 2002
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected Via Apollo Pro chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Via 686a audio driver 1.9.1
PCI: Found IRQ 9 for device 00:07.5
ac97_codec: AC97 Audio codec, id: 0x4144:0x5340 (Analog Devices AD1881)
via82cxxx: board #1 at 0x5800, IRQ 9
Assertion failed! buffer != NULL,via82cxxx_audio.c,via_dsp_write,line=2308
ide-floppy driver 0.99.newide
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
### lspci -v output
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
Flags: bus master, medium devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
(prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: 80100000-820fffff
Prefetchable memory behind bridge: 82200000-900fffff
Capabilities: <available only to root>
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 10)
(prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at 5cc0 [size=16]
Capabilities: <available only to root>
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 10) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at 5c80 [size=32]
Capabilities: <available only to root>
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Flags: medium devsel
Capabilities: <available only to root>
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio
Controller (rev 20)
Subsystem: Acer Incorporated [ALI]: Unknown device 0018
Flags: medium devsel, IRQ 9
I/O ports at 5800 [size=256]
I/O ports at 5c00 [size=4]
I/O ports at 5c40 [size=4]
Capabilities: <available only to root>
00:0b.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
Subsystem: Adaptec 29160N Ultra160 SCSI Controller
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
BIST result: 00
I/O ports at 5000 [disabled] [size=256]
Memory at 82100000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 82120000 [disabled] [size=128K]
Capabilities: <available only to root>
00:0d.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
Subsystem: Intel Corp. 82559 Fast Ethernet LAN on Motherboard
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at 90200000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 5400 [size=64]
Memory at 90300000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at 90400000 [disabled] [size=1M]
Capabilities: <available only to root>
01:00.0 VGA compatible controller: nVidia Corporation NV10 [GeForce 256 DDR] (rev 10)
(prog-if 00 [VGA])
Subsystem: Silicon Graphics, Inc.: Unknown device 9001
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 9
Memory at 81000000 (32-bit, non-prefetchable) [size=16M]
Memory at 88000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 80100000 [disabled] [size=64K]
Capabilities: <available only to root>
# dmesg output
Linux version 2.4.9-e.10 ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Red Hat Linux 7.2 2.96-108.1)) #1 Thu Nov 14 11:09:11 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fffe000 (usable)
BIOS-e820: 000000002fffe000 - 0000000030000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196606
zone(0): 4096 pages.
zone(1): 192510 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/sda3
Initializing CPU#0
Detected 498.362 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 992.87 BogoMIPS
Memory: 764088k/786424k available (1808k kernel code, 15916k reserved, 95k data, 224k
init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 9, 2097152 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PowerEdge 2400 series board detected. Selecting BIOS-method for reboots.
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfc7ee, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 02 [IRQ]
PCI: Using IRQ router ServerWorks [1166/0200] at 00:0f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
mxt_scan_bios: enter
Starting kswapd v1.8
bigpage subsystem: allocated 0 bigpages (=0MB).
VFS: Diskquotas version dquot_6.5.0 initialized
aio_setup: num_physpages = 49151
aio_setup: sizeof(struct page) = 68
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: queued sectors max/low 506704kB/375632kB, 1536 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 239k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 01:06.0
PCI: Found IRQ 14 for device 01:04.0
(scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 1/4/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 398 instructions downloaded
(scsi1) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 1/6/0
(scsi1) Narrow Channel, SCSI ID=7, 16/255 SCBs
(scsi1) Warning - detected auto-termination
(scsi1) Please verify driver detected settings are correct.
(scsi1) If not, then please properly set the device termination
(scsi1) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi1) during machine bootup.
(scsi1) Cables present (Int-50 NO, Ext-50 NO)
(scsi1) Downloading sequencer code... 436 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.5/5.2.0
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.5/5.2.0
<Adaptec AIC-7880 Ultra SCSI host adapter>
blk: queue c24a1e18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST318305LC Rev: 2203
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c24a1c18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST39103LC Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
blk: queue c1fc6018, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST39103LC Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
blk: queue c1fc6218, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST39204LC Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c1fc6418, I/O limit 4095Mb (mask 0xffffffff)
Vendor: DELL Model: 1x6 U2W SCSI BP Rev: 5.35
Type: Processor ANSI SCSI revision: 02
blk: queue c1fc6a18, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c1fc6a18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: NEC Model: CD-ROM DRIVE:466 Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
blk: queue c1e92618, I/O limit 4095Mb (mask 0xffffffff)
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
Attached scsi disk sdd at scsi0, channel 0, id 3, lun 0
(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 63.
SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB)
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
(scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 15.
SCSI device sdb: 17783240 512-byte hdwr sectors (9105 MB)
sdb: sdb1
(scsi0:0:2:0) Synchronous at 80.0 Mbyte/sec, offset 15.
SCSI device sdc: 17783240 512-byte hdwr sectors (9105 MB)
sdc: sdc1
(scsi0:0:3:0) Synchronous at 80.0 Mbyte/sec, offset 63.
SCSI device sdd: 17783239 512-byte hdwr sectors (9105 MB)
sdd: sdd1
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 224k freed
Adding Swap: 2016148k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Assigned IRQ 12 for device 00:0f.2
usb-ohci.c: USB OHCI at membase 0xf0979000, IRQ 12
usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,3), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,17), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,49), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.11, 3 Oct 2001 on sd(8,33), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 8
0x378: readIntrThreshold is 8
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x14 cfgB=0x40
0x378: ECP settings irq=<none or set by other means> dma=<none or set by other means>
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(08)
parport0: assign_addrs: aa5500ff(08)
parport0: cpp_daisy: aa5500ff(08)
parport0: assign_addrs: aa5500ff(08)
ip_tables: (c)2000 Netfilter core team
ip_conntrack (6143 buckets, 49144 max)
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<[EMAIL PROTECTED]> and others
PCI: Found IRQ 11 for device 02:06.0
IRQ routing conflict for 02:06.0, have irq 10, want irq 11
eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:46:B5:3A, IRQ 10.
Board assembly a08922-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x04f4518b).
# lspci -v output
00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
Flags: bus master, medium devsel, latency 32
00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
Flags: bus master, medium devsel, latency 32
00:02.0 PCI bridge: Intel Corporation: Unknown device 0962 (rev 01) (prog-if 00
[Normal decode])
Flags: bus master, medium devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: fa000000-faffffff
00:0e.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC (rev 7a) (prog-if
00 [VGA])
Subsystem: Dell Computer Corporation: Unknown device 009b
Flags: bus master, stepping, medium devsel, latency 32
Memory at f8000000 (32-bit, prefetchable) [size=16M]
I/O ports at ec00 [size=256]
Memory at fe001000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4f)
Subsystem: ServerWorks OSB4 South Bridge
Flags: bus master, medium devsel, latency 0
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04) (prog-if 10
[OHCI])
Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 12
Memory at fe000000 (32-bit, non-prefetchable) [size=4K]
01:04.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890 (rev 01)
Subsystem: Adaptec 2940U2W SCSI Controller
Flags: bus master, medium devsel, latency 32, IRQ 14
BIST result: 00
I/O ports at fc00 [size=256]
Memory at fcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fd000000 [disabled] [size=128K]
Capabilities: <available only to root>
01:06.0 SCSI storage controller: Adaptec AIC-7880U (rev 01)
Subsystem: Adaptec AIC-7880P Ultra/Ultra Wide SCSI Chipset
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at f800 [size=256]
Memory at fcffe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fd000000 [disabled] [size=64K]
Capabilities: <available only to root>
02:06.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Server Adapter (PILA8470B)
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at f6100000 (32-bit, non-prefetchable) [size=4K]
I/O ports at dcc0 [size=64]
Memory at f6000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <available only to root>
