I am currently testing FreeBSD 5.0-DP2 on my Sony Vaio FX-210 laptop. I am
having some error messages from the ACPI driver, so I figured I would report
them just in case. If anyone needs any more information, perhaps more
verbose debug output or something, please let me know.
I am getting the following messages repeatedly at startup.
ACPI-0432: *** Error: Handler for [EmbeddedControl returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
When I hit the sleep button on my computer I get:
acpi0: AcpiGetSleepTypeDate failed - AE_NOT_FOUND
This is the output of acpidump:
/*
RSD PTR: Checksum=80, OEMID=PTLTD, RsdtAddress=0x0fef9a51
*/
/*
RSDT: Length=48, Revision=1, Checksum=247,
OEMID=SONY, OEM Table ID=K5, OEM Revision=0x6040000,
Creator ID= LTP, Creator Revision=0x0
*/
/*
Entries={ 0x0fefee4c, 0x0fefeec0, 0x0fefeee8 }
*/
/*
DSDT=0xfef9a81
INT_MODEL=PIC
SCI_INT=9
SMI_CMD=0x802f, ACPI_ENABLE=0xf0, ACPI_DISABLE=0xf1, S4BIOS_REQ=0xf2
PM1a_EVT_BLK=0x8000-0x8003
PM1a_CNT_BLK=0x8004-0x8005
PM2_TMR_BLK=0x8008-0x800b
PM2_GPE0_BLK=0x8020-0x8023
P_LVL2_LAT=90ms, P_LVL3_LAT=1100ms
FLUSH_SIZE=0, FLUSH_STRIDE=0
DUTY_OFFSET=0, DUTY_WIDTH=4
DAY_ALRM=125, MON_ALRM=126, CENTURY=50
Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4,TMR_VAL_EXT}
*/
acpidump: DSDT is corrupt
This is the dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #3: Sun Dec 22 21:10:40 GMT 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/VAIO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0499000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04990a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1000043490 Hz
CPU: AMD Athlon(tm) Processor (1000.04-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xffffffffc0480000<MP,AMIE,DSP,3DNow!>
real memory = 268435456 (256 MB)
avail memory = 255709184 (243 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <SONY K5 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 6 entries at 0xc00fdf60
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem
0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x1c40-0x1c4f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1c00-0x1c1f irq 9 at device 7.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1c20-0x1c3f irq 9 at device 7.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isab1: <PCI-ISA bridge> at device 7.4 on pci0
pcm0: <VIA VT82C686A> port 0x1c50-0x1c53,0x1c54-0x1c57,0x1000-0x10ff irq 5
at device 7.5 on pci0
pci0: <simple comms> at device 7.6 (no driver attached)
cbb0: <TI1420 PCI-CardBus Bridge> mem 0x88000000-0x88000fff irq 9 at device
10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1420 PCI-CardBus Bridge> mem 0x88001000-0x88001fff irq 10 at device
10.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <serial bus, FireWire> at device 14.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x1800-0x18ff mem
0xe8004800-0xe80048ff irq 10 at device 16.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect
mode
rl0: Ethernet address: 08:00:46:1d:19:89
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd0000-0xd3fff,0xc0000-0xcffff
on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
system power profile changed to 'economy'
wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 9 function 0 config 1 on pccard0
wi0: 802.11 address: 08:00:46:09:b4:b7
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station 6.04.01
ata1-slave: ATAPI identify retries exceeded
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA66
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2502> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
system power profile changed to 'performance'
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_AML_NO_RETURN_VALUE
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
