Muhannad Asfour wrote:
Here's the dmesg output:Hi Muhannad,
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of tie University of California. All rights
reserved.
FreeBSD 5.0-CURRENT #0: Fri Dec 20 00:32:59 EST 2002\M^J
[EMAIL PROTECTED]:/usr/src/sys/I386/compile/QUBIX
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0520000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05200a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2394014604 Hz
CPU: Pentium 4 (2394.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xffffffffbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,
MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
,<b31>>
real memory = 536854528 (511 MB)
avail memory = 516100096 (492 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S533 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 10 entries at 0xc00f1b20
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI"PCI bus> on pcib1\^Zisab0: <PCI-ISA bridge> at device 2.0 on
pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xf7800000-0xf7800fff irq 10 at
device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xf7000000-0xf7000fff irq 5 at
device 2.3 on pci0
usb1: OHCI version!1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA33 controller> port 0xd800-0xd80f at device 2.5(on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
sis0: <SiS 900 10/100BaseTX> port 0xb000-0xb0ff mem
0xf6800000-0xf6800fff irq 12 at device 3.0 on pci0
sis0: Ethernet address: 00:e0:18:ab:17:b8
sis0: MII without any PHY!
device_probe_and_attach: sis0 attach returned 6
pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 11 at device 5.0 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa400-0xa47f mem
0xf6000000-0xf600007f irq 11 at device 9.0 on pci0
xl0: Ethernet address: 00:01:02:84:e3:7e
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller"(i82077, NE72065 os clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes vhreshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
tlip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0y60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xc8000-0xc87ff on isa0
pmtimer0 on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA33
ad1: 38182MB <MAXTOR 4K040H2> [77578/16/63] at ata0-slave UDMA33
acd0: CDROM <HL-DT-ST$CD-ROM GCR-8520B> at ata1-master PIO\M-4
Mounting root from ufs:/dev/ad0s1a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to
stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 8 8 done
Uptime: 36s
Power system off using ACPI...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.0-CURRENT #0: Fri Dec 20 00:32:59 EST 2002
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/QUBIX
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0520000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05200a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2394010816 Hz
CPU: Pentium 4 (2394.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xffffffffbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,
MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
,<b31>>
real memory = 536854528 (511 MB)
avail memory = 515989504 (492 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P4S533 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 10 entries at 0xc00f1b20
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <SIS Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xef000000-0xef000fff irq 12 at
device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xee800000-0xee800fff irq 9 at
device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA33 controller> port 0xb800-0xb80f at device 2.5 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
sis0: <SiS 900 10/100BaseTX> port 0xa000-0xa0ff mem
0xee000000-0xee000fff irq 5 at device 3.0 on pci0
sis0: Ethernet address: 00:e0:18:ab:17:b8
sis0: MII without any PHY!
device_probe_and_attach: sis0 attach returned 6
pcm0: <CMedia CMI8738> port 0x9800-0x98ff irq 10 at device 5.0 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9400-0x947f mem
0xed800000-0xed80007f irq 10 at device 9.0 on pci0
xl0: Ethernet address: 00:01:02:84:e3:7e
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA33
ad1: 38182MB <MAXTOR 4K040H2> [77578/16/63] at ata0-slave UDMA33
acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
lock order reversal
Here's the mod_php4 build process:
Script started on Fri Dec 20 21:49:13 2002
Define WITH_APACHE2 to build mod_php4 as an apache2 module.
===> Extracting for mod_php4-4.2.3
Define WITH_APACHE2 to build mod_php4 as an apache2 module.
===> mod_php4-4.2.3 depends on file: /usr/local/sbin/apxs - foundChecksum OK for php-4.2.3.tar.bz2.
===> mod_php4-4.2.3 depends on file:
/usr/local/libexec/autoconf213/autoconf - found
===> mod_php4-4.2.3 depends on shared library: mysqlclient.10 - found
===> Patching for mod_php4-4.2.3
===> Applying FreeBSD patches for mod_php4-4.2.3
===> Configuring for mod_php4-4.2.3
configure.in:526: warning: AC_TRY_RUN called without default to allow
cross compiling
ext/imap/config.m4:168: warning: AC_TRY_RUN called without default to
allow cross compiling
ext/qtdom/config.m4:34: AC_PROG_CXXCPP was called before AC_PROG_CXX
ext/session/config.m4:30: warning: AC_TRY_RUN called without default to
allow cross compiling
ext/session/config.m4:31: warning: AC_TRY_RUN called without default to
allow cross compiling
ext/xml/config.m4:8: warning: AC_TRY_RUN called without default to allow
cross compiling
creating cache ./config.cache
checking for Cygwin environment... no
checking for mingw32 environment... no
checking host system type... i386-portbld-freebsd5.0
checking for a BSD compatible install... /usr/bin/install -c -o root -g
wheel
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... found
checking for working automake... missing
checking for working autoheader... found
checking for working makeinfo... found
checking whether to enable maintainer-specific portions of Makefiles...
no
Updated php_version.h
checking for gcc... cc
checking whether the C compiler (cc -O -pipe -march=pentium4
-I/usr/local/include ) works... yes
checking whether the C compiler (cc -O -pipe -march=pentium4
-I/usr/local/include ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether cc accepts -g... yes
checking whether cc understands -c and -o together... yes
checking how to run the C preprocessor... cc -E
checking for AIX... no
checking for cc option to accept ANSI C... none needed
checking whether compiler supports -R... yes
checking for ranlib... ranlib
checking whether ln -s works... yes
checking for mawk... no
checking for gawk... no
checking for nawk... nawk
checking for bison... bison -y
checking bison version... 1.75 (ok)
checking for flex... flex
checking for yywrap in -lfl... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... yes
checking for working const... yes
checking for pthreads_cflags... -pthread
checking for pthreads_lib...
[1mConfiguring SAPI modules[m
checking for AOLserver support... no
checking for Apache 1.x module support via DSO through APXS... yes
checking for mod_charset compatibility option... no
checking for Apache 2.0 module support via DSO through APXS... no
checking for Caudium support... no
checking for fhttpd module support... no
checking for CLI build... no
checking for FastCGI support... no
checking for Zeus ISAPI support... no
checking for NSAPI support... no
checking for PHTTPD support... no
checking for Pi3Web Support... no
checking for Roxen/Pike support... no
checking for Servlet support... no
checking for thttpd... no
checking for TUX... no
checking for webjames... no
checking for chosen SAPI module... apache
[1mRunning system checks[m
checking for missing declarations of reentrant functions... done
checking for sendmail... /usr/sbin/sendmail
checking whether system uses EBCDIC... no
checking for socket in -lsocket... no
checking for htonl in -lsocket... no
checking for yp_get_default_domain... yes
checking for dlopen in -ldl... no
checking for sin in -lm... yes
checking for inet_aton in -lresolv... no
checking for inet_aton in -lbind... no
checking for __inet_aton in -lbind... no
checking for res_search in -lsocket... no
checking for res_search in -lresolv... no
checking for dn_skipname in -lresolv... no
checking for __dn_skipname in -lresolv... no
checking for ANSI C header files... no
checking for dirent.h that defines DIR... yes
checking for opendir in -ldir... no
checking for fclose declaration... ok
checking for ApplicationServices/ApplicationServices.h... no
checking for alloca.h... no
checking for arpa/inet.h... no
checking for arpa/nameser.h... no
checking for crypt.h... no
checking for fcntl.h... no
checking for grp.h... no
checking for ieeefp.h... no
checking for langinfo.h... no
checking for limits.h... no
checking for locale.h... no
checking for netinet/in.h... no
checking for pwd.h... no
checking for resolv.h... no
checking for signal.h... no
checking for stdarg.h... no
checking for stdlib.h... no
checking for string.h... no
checking for syslog.h... no
checking for sysexits.h... no
checking for sys/file.h... no
checking for sys/mman.h... no
checking for sys/mount.h... no
checking for sys/resource.h... no
checking for sys/select.h... no
checking for sys/socket.h... no
checking for sys/statfs.h... no
checking for sys/statvfs.h... no
checking for sys/vfs.h... no
checking for sys/sysexits.h... no
checking for sys/time.h... no
checking for sys/types.h... no
checking for sys/varargs.h... no
checking for sys/wait.h... no
checking for unistd.h... no
checking for unix.h... no
checking for utime.h... no
checking whether struct tm is in sys/time.h or time.h... time.h
checking for tm_zone in struct tm... yes
checking for tm_gmtoff in struct tm... yes
checking for struct flock... yes
checking for socklen_t... yes
checking size of long... 4
checking size of int... 4
checking for st_blksize in struct stat... yes
checking for st_blocks in struct stat... yes
checking for st_rdev in struct stat... yes
checking for size_t... yes
checking for uid_t in sys/types.h... yes
checking for struct sockaddr_storage... yes
checking for IPv6 support... yes
checking for vprintf... yes
checking for asctime_r... yes
checking for chroot... yes
checking for ctime_r... yes
checking for cuserid... no
checking for crypt... no
checking for flock... yes
checking for gai_strerror... yes
checking for gcvt... no
checking for getlogin... yes
checking for gethostbyaddr... yes
checking for getprotobyname... yes
checking for getprotobynumber... yes
checking for getservbyname... yes
checking for getservbyport... yes
checking for getrusage... yes
checking for gettimeofday... yes
checking for gmtime_r... yes
checking for inet_aton... yes
checking for isascii... yes
checking for link... yes
checking for localtime_r... yes
checking for lockf... yes
checking for lrand48... yes
checking for memcpy... yes
checking for memmove... yes
checking for mkstemp... yes
checking for mmap... yes
checking for nl_langinfo... yes
checking for putenv... yes
checking for realpath... yes
checking for random... yes
checking for rand_r... yes
checking for regcomp... yes
checking for res_search... yes
checking for setitimer... yes
checking for setlocale... yes
checking for localeconv... yes
checking for setsockopt... yes
checking for setvbuf... yes
checking for shutdown... yes
checking for sin... yes
checking for snprintf... yes
checking for srand48... yes
checking for srandom... yes
checking for statfs... yes
checking for statvfs... yes
checking for std_syslog... no
checking for strcasecmp... yes
checking for strcoll... yes
checking for strdup... yes
checking for strerror... yes
checking for strftime... yes
checking for strstr... yes
checking for strtok_r... yes
checking for symlink... yes
checking for tempnam... yes
checking for tzset... yes
checking for unsetenv... yes
checking for usleep... yes
checking for utime... yes
checking for vsnprintf... yes
checking for getaddrinfo... yes
checking for strlcat... yes
checking for strlcpy... yes
checking for getopt... yes
checking whether utime accepts a null argument... yes
checking for working alloca.h... (cached) no
checking for alloca... yes
checking whether sprintf is broken... no
checking for declared timezone... yes
checking for type of reentrant time-related functions... POSIX
checking for readdir_r... yes
checking for type of readdir_r... POSIX
checking whether to include debugging symbols... no
checking layout of installed files... yes
checking path to configuration file... yes
checking whether to install PEAR, and where... yes
checking whether to enable safe mode by default... no
checking for safe mode exec dir... /usr/local/php/bin
checking for OpenSSL support... no
checking whether to enable PHP's own SIGCHLD handler... no
checking whether to enable magic quotes by default... no
checking whether to enable runpaths... yes
checking whether to explicitly link against libgcc... no
checking whether to enable short tags by default... yes
checking whether to enable dmalloc... no
checking for crypt in -lcrypt... yes
[1mConfiguring extensions[m
checking if the location of ZLIB install directory is defined... no
checking for ZLIB support... yes
checking for gzgets in -lz... yes
checking for fopencookie... no
checking for ASPELL support... no
checking whether to enable bc style precision math functions... no
checking for BZip2 support... no
checking whether to enable calendar conversion support... no
checking for CCVS support... no
checking for cpdflib support... no
checking for CRACKlib support... no
checking whether to enable ctype functions... yes
checking for CURL support... no
checking for CyberCash support... no
checking for cybermut support... no
checking for cyrus imap support... no
checking for xDBM support... no
checking whether to enable DBA... no
checking for GDBM support... no
checking for NDBM support... no
checking for Berkeley DB2 support... no
checking for Berkeley DB3 support... no
checking for DBM support... no
checking for CDB support... no
checking whether to enable DBA interface... no
checking whether to enable dbase support... no
checking for dbplus support... no
checking whether to enable dbx support... no
checking whether to enable direct I/O support... no
checking for DOM support... no
checking for DOM XSLT support... no
checking for DOM EXSLT support... no
checking whether to enable EXIF support... no
checking for FrontBase SQL92 (fbsql) support... no
checking for FDF support... no
checking whether to enable the bundled filePro support... no
checking for FriBidi support... no
checking whether to enable FTP support... no
checking for GD support... no
checking for GNU gettext support... no
checking for GNU MP support... no
checking for Hyperwave support... no
checking for ICAP support... no
checking for iconv support... no
checking for IMAP support... no
checking for Informix support... no
checking for Ingres II support... no
checking for InterBase support... no
checking for IRCG support... no
checking for Java support... no
checking for LDAP support... no
checking whether to enable multibyte string support... no
checking whether to enable japanese encoding translation... no
checking whether to enable multibyte regex support... no
checking for MCAL support... no
checking for mcrypt support... no
checking for MCVE support... no
checking for mhash support... no
checking for MING support... no
checking for mnoGoSearch support... no
checking for msession support... no
checking for mSQL support... no
checking for Muscat support... no
checking for MySQL support... yes
checking size of char... 1
checking size of int... (cached) 4
checking size of long... (cached) 4
checking size of long long... 8
checking for size_t... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking for uid_t in sys/types.h... (cached) yes
checking for type ulong... no
checking for type uchar... no
checking for type uint... yes
checking for type ushort... yes
checking for int8... no
checking base type of last arg to accept... socklen_t
checking return type of qsort... void
checking for mysql_close in -lmysqlclient... yes
checking for MySQL UNIX socket... /tmp/mysql.sock
checking for ncurses support... no
checking for Oracle-OCI8 support... no
checking for Adabas support... no
checking for SAP DB support... no
checking for Solid support... no
checking for IBM DB2 support... no
checking for Empress support... no
checking for Empress local access support... no
checking for Birdstep support... no
checking for a custom ODBC support... no
checking for iODBC support... no
checking for Easysoft ODBC-ODBC Bridge support... no
checking for unixODBC support... no
checking for OpenLink ODBC support... no
checking for DBMaker support... no
checking for Oracle-ORACLE support... no
checking whether to enable user-space object overloading support... no
checking for Ovrimos SQL Server support... no
checking whether to enable pcntl support... no
checking for PCRE support... yes
checking for memmove... (cached) yes
checking for PDFlib support... no
checking for Verisign Payflow Pro support... no
checking for PostgreSQL support... no
checking whether to enable POSIX-like functions... yes
checking for seteuid... yes
checking for setegid... yes
checking for setsid... yes
checking for getsid... yes
checking for setpgid... yes
checking for getpgid... yes
checking for ctermid... yes
checking for mkfifo... yes
checking for getrlimit... yes
checking for PSPELL support... no
checking whether to include QDOM support... no
checking for libedit readline replacement... no
checking for readline support... no
checking for recode support... no
checking whether to enable PHP sessions... yes
checking for mm support... no
checking for pread... yes
checking for pwrite... yes
checking whether pwrite works without custom declaration... yes
checking whether pread works without custom declaration... yes
checking whether to enable shmop support... no
checking for SNMP support... no
checking whether to enable UCD SNMP hack... no
checking whether to enable sockets support... no
checking for dlopen... yes
checking for pam_start in -lpam... yes
checking for getcwd... yes
checking for getwd... yes
checking for standard DES crypt... yes
checking for extended DES crypt... yes
checking for MD5 crypt... yes
checking for Blowfish crypt... yes
checking whether flush should be called explicitly after a bufferered
io... yes
checking whether to enable aggregation support... no
checking for libswf support... no
checking for Sybase support... no
checking for Sybase-CT support... no
checking whether to enable System V semaphore support... no
checking whether to enable System V shared memory support... no
checking whether to enable tokenizer support... no
checking for vpopmail support... no
checking whether to enable WDDX support... no
checking whether byte ordering is bigendian... no
checking whether to enable XML support... yes
checking external libexpat install dir... no
checking for XMLRPC-EPI support... no
checking libexpat dir for XMLRPC-EPI... no
checking iconv dir for XMLRPC-EPI... no
checking whether to enable xslt support... no
checking for XSLT Sablotron backend... no
checking libexpat dir for Sablotron XSL support... no
checking enable JavaScript for Sablotron... no
checking for YAZ support... no
checking whether to include YP support... no
checking for ZIP support... no
checking whether to enable versioning... yes
checking which regex library to use... php
[1mConfiguring Zend[m
checking build system type... i386-portbld-freebsd5.0
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognise dependant libraries... pass_all
checking for object suffix... o
checking for executable suffix... no
checking command to parse /usr/bin/nm -B output... ok
checking for dlfcn.h... no
checking for ranlib... (cached) ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... no
checking if we can lock with hard links... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/bin/ld) supports shared libraries...
yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd5.0 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether -lc should be explicitly linked in... yes
creating libtool
checking bison version... 1.75 (ok)
checking for limits.h... (cached) no
checking for malloc.h... no
checking for string.h... (cached) no
checking for unistd.h... (cached) no
checking for stdarg.h... (cached) no
checking for sys/types.h... (cached) no
checking for sys/time.h... (cached) no
checking for signal.h... (cached) no
checking for unix.h... (cached) no
checking for dlfcn.h... (cached) no
checking for size_t... (cached) yes
checking return type of signal handlers... void
checking for dlopen in -ldl... (cached) no
checking for dlopen... (cached) yes
checking whether dlsym() requires a leading underscore in symbol
names... no
checking for uint... yes
checking for ulong... no
checking for vprintf... (cached) yes
checking for 8-bit clean memcmp... yes
checking for working alloca.h... (cached) no
checking for alloca... (cached) yes
checking for memcpy... (cached) yes
checking for strdup... (cached) yes
checking for getpid... yes
checking for kill... yes
checking for strtod... yes
checking for strtol... yes
checking for finite... no
checking for fpclass... no
checking whether sprintf is broken... (cached) no
checking for finite... (cached) no
checking for isfinite... no
checking for isinf... yes
checking for isnan... yes
checking whether fp_except is defined... no
checking whether to enable experimental ZTS... no
checking whether to enable inline optimization for GCC... no
checking whether to enable a memory limit... no
checking whether to enable Zend debugging... no
checking for inline... inline
[1mConfiguring TSRM[m
checking for stdarg.h... (cached) no
[1mGenerating files[m
checking for working mkdir -p... yes
creating config_vars.mk
updating cache ./config.cache
creating ./config.status
creating php4.spec
creating Zend/Makefile
creating main/build-defs.h
creating pear/scripts/pear
creating pear/scripts/phpize
creating pear/scripts/php-config
creating pear/scripts/pearize
creating pear/scripts/phptar
creating TSRM/Makefile
creating main/php_config.h
fastgen.sh: creating sapi/Makefile
fastgen.sh: creating ext/Makefile
fastgen.sh: creating Makefile
fastgen.sh: creating pear/Makefile
fastgen.sh: creating main/Makefile
fastgen.sh: creating sapi/cli/Makefile
fastgen.sh: creating ext/zlib/Makefile
fastgen.sh: creating ext/ctype/Makefile
fastgen.sh: creating ext/mysql/Makefile
fastgen.sh: creating ext/pcre/Makefile
fastgen.sh: creating ext/pcre/pcrelib/Makefile
fastgen.sh: creating ext/posix/Makefile
fastgen.sh: creating ext/session/Makefile
fastgen.sh: creating ext/standard/Makefile
fastgen.sh: creating ext/xml/Makefile
fastgen.sh: creating ext/xml/expat/Makefile
fastgen.sh: creating sapi/apache/Makefile
fastgen.sh: creating regex/Makefile
creating number.c
creating number.h
creating main/internal_functions.c
creating main/internal_functions_cli.c
+--------------------------------------------------------------------+
| License: |
| This software is subject to the PHP License, available in this |
| distribution in the file LICENSE. By continuing this installation |
| process, you are bound by the terms of this license agreement. |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point. |
+--------------------------------------------------------------------+
| *** NOTE *** |
| The default for register_globals is now OFF! |
| |
| If your application relies on register_globals being ON, you |
| should explicitly set it to on in your php.ini file. |
| Note that you are strongly encouraged to read |
| http://www.php.net/manual/en/security.registerglobals.php |
| about the implications of having register_globals set to on, and |
| avoid using it if possible. |
+--------------------------------------------------------------------+
Thank you for using PHP.
===> Building for mod_php4-4.2.3
Making all in Zend
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c
zend_language_parser.c
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c
zend_language_scanner.c
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c zend_ini_parser.c
zend_ini_parser.c: In function `ini_parse':
zend_ini_parser.c:899: warning: assignment makes pointer from integer
without a cast
zend_ini_parser.c:902: warning: assignment makes pointer from integer
without a cast
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c zend_ini_scanner.c
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c zend_alloc.c
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c zend_compile.c
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c zend_constants.c
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c zend_dynamic_array.c
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c ./zend_execute.c
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I.
-I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI
-DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI
-DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe
-march=pentium4 -I/usr/local/include -prefer-pic -c zend_execute_API.c
zend_execute_API.c: In function `zend_set_timeout':
zend_execute_API.c:782: storage size of `t_r' isn't known
zend_execute_API.c:788: `ITIMER_PROF' undeclared (first use in this
function)
zend_execute_API.c:788: (Each undeclared identifier is reported only
once
zend_execute_API.c:788: for each function it appears in.)
zend_execute_API.c: In function `zend_unset_timeout':
zend_execute_API.c:806: storage size of `no_timeout' isn't known
zend_execute_API.c:810: `ITIMER_PROF' undeclared (first use in this
function)
*** Error code 1
Stop in /usr/ports/www/mod_php4/work/php-4.2.3/Zend.
*** Error code 1
Stop in /usr/ports/www/mod_php4/work/php-4.2.3.
*** Error code 1
Stop in /usr/ports/www/mod_php4.
*** Error code 1
Stop in /usr/ports/www/mod_php4.
Script done on Fri Dec 20 21:49:43 2002
Thanks.
-----Original Message-----
From: Jens Rehsack [mailto:[EMAIL PROTECTED]] Sent: Friday, December 20, 2002 9:25 PM
To: Muhannad Asfour
Cc: [EMAIL PROTECTED]
Subject: Re: mod_php4 4.2.3 under 5.0-CURRENT
Muhannad Asfour wrote:
howHi, I was searching on groups.google.com recently to try to find out
andto get mod_php4 compiled under 5.0-CURRENT, and I found your message
serverthought you might be of some assistance. I recently built a new
sources,and wanted to run 5.0-CURRENT on it. I installed 5.0, cvsupped
exceptrebuilt world, updated all of the ports. Everything works great,
replythe mod_php4 won?t build (Yes, I e-mailed the port maintainer, no
ifyet) :( . I was wondering if you got it to build? Here is my error
you might be able to help me:
===> Building for mod_php4-4.2.3
Making all in Zend
/bin/sh ../libtool --silent --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../main -DMOD_SSL=208112 -DMOD_PERL -DUSE_PERL_SSI -DAPPLLIB_EXP="/usr/local/lib/perl5/5.6.1/BSDPAN" -DEAPI -DAPPLLIB_EXP=/usr/local/lib/perl5/5.6.1/BSDPAN -I../TSRM -O -pipe -march=pentium4 -I/usr/local/include -prefer-pic -c zend_execute_API.c
zend_execute_API.c: In function `zend_set_timeout':
zend_execute_API.c:782: storage size of `t_r' isn't known
zend_execute_API.c:788: `ITIMER_PROF' undeclared (first use in this function)
zend_execute_API.c:788: (Each undeclared identifier is reported only
oncezend_execute_API.c:788: for each function it appears in.)server
zend_execute_API.c: In function `zend_unset_timeout':
zend_execute_API.c:806: storage size of `no_timeout' isn't known
zend_execute_API.c:810: `ITIMER_PROF' undeclared (first use in this function)
*** Error code 1
Stop in /usr/ports/www/mod_php4/work/php-4.2.3/Zend.
*** Error code 1
Stop in /usr/ports/www/mod_php4/work/php-4.2.3.
*** Error code 1
Stop in /usr/ports/www/mod_php4.
*** Error code 1
Stop in /usr/ports/www/mod_php4.
Any help would greatly be appreciated, since this is a brand new
that needs to be up and running ASAP.
Hi Muhannad,
I just need a little bit more information to help you, cause I didn't run into compiler errors but in linker errors.
Please send me your dmesg output and use the script(1) command to log your entire mod_php4 build process and send me that output, too.
And please do not expect fast answers. It's 3:45 am here and I'm going to sleep in near future :-)
Thanks,
Jens
At first some things to questions:
1) Please use always reply-all to cc the list (if any cc'ed before)
2) Please avoid top posting
3) Read /usr/src/UPDATING before updating world and kernel (it seems you
had not)
4) Read the homepage of the ports if they're fail, first
You've compiled www/mod_php4 with apache2 support. This is marked as experimental in php 4.2.x, fine work is expected at least with 4.3.
You either have to use apache13 or find the missing declaration include file(s) using find(1) and grep(1).
Jens
--
L i W W W i Jens Rehsack
L W W W
L i W W W W i nnn gggg LiWing IT-Services
L i W W W W i n n g g
LLLL i W W i n n g g Friesenstraße 2
gggg 06112 Halle
g
g g
Tel.: +49 - 3 45 - 5 17 05 91 ggg e-Mail: <[EMAIL PROTECTED]>
Fax: +49 - 3 45 - 5 17 05 92 http://www.liwing.de/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
