Joe Marcus Clarke wrote: > > On Wed, 2002-12-04 at 22:46, Rob wrote: > > Rob wrote: > > > > > > Joe Marcus Clarke wrote: > > > > > > > > On Wed, 2002-12-04 at 17:04, Rob wrote: > > > > > Is there any solution to the above combo other than just waiting? > > > > > > > > I think you've seen my how-to at > > > > http://www.marcuscom.com/g2g-xfree86/article.html. Did it not work for > > > > your card, or are you referring to GeForce 4 with accelerated 3D > > > > support? > > > > > > > > Joe > > > > > > Hi Joe, > > > > I have confirmed that your procedure didn't work with my Asus V8170 > > Geforce 4 card. But its not a hardware issue. I'm getting undefined > > symbols in one of the libraries. I will later today boot into DP2 and > > see if I can put together a more meaningful report. I built the > > XFree86-4 metaport from a fresh ports directory. First make deinstall > > then make reinstall. > > I've seen that before. It usually can be fixed by making sure that the > correct X server modules are loaded. That is, of course, if you're > seeing unresolved symbols in X itself. > > Joe > > > > > Thanks, Rob. > > > > > > > > > > > > > > > > > thanks, Rob. > > > > -- > > > > PGP Key : http://www.marcuscom.com/pgp.asc > > > > > > Thanks Joe, > > > > > > I will check it out. I think I used your procedure to get the Geforce 2 > > > on my laptop -current working. But I tried a number of things for DP2 > > > on my big machine that didn't work. In that case I've got an Asus V8170 > > > Geforce 4 card that I got on the cheap. I can always go back to a Riva > > > TNT or something thats < $20 :) :) > > > > > > Rob. > > > > > > -- > > > ----------------------------- > > > The Numeric Python EM Project > > > > > > www.pythonemproject.com > -- > PGP Key : http://www.marcuscom.com/pgp.asc
Ok, here is the error message. The server never even gets past go: "Symbol vgaHWUnmapMem from module /usr/X11R6/lib/modules/drivers/nv_drv.o is unresolved!" Fatal server error: Caught signal 11. Server aborting. Rob. -- ----------------------------- The Numeric Python EM Project www.pythonemproject.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
