On Tue, Nov 26, 2002 at 11:32:07PM +0100, Jan Srzednicki wrote: > I have -CURRENT from Saturday on my box. I have SB 128PCI on my board, the > module detects it without problems and seems to work fine. But the problem > is that the sound is not clear; there happen to be some itchy noises from > time to time, when I push up the system load. I wonder whether enlarging > the sound buffer woul help, yet hw.snd.pcm0.buffersize is read-only, even > setting it in /boot/loader.conf does not help. Under -STABLE those "ithes" > never happened, so I don't think it's a hw issue.
I have the same problem. It sounds like the soundbuffer runs empty somehow and needs to fill up before continueing. This results in something that sounds like a really small sample(1ms) looping for 1second or so. If this makes sense? :o) FreeBSD 5.0-CURRENT and a trident onboard soundcard which uses the snd_t4dwave.ko module. <snip> pcm0: <Acer Labs M5451> port 0xed00-0xedff mem 0xf7efe000-0xf7efefff irq 11 at device 6.0 on pci0 </snip> /peter -- (scheme (makes 'my (brain (hurt '())))) To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
